Hello friends, Hope you all are doing great !!!
I finally got the PC and given below is it's config,
CPU - Phenom II X4 955 3.2GHz B.E.
Mobo - Gigabyte GA-MA785GMT-UD2H
RAM - Kingston KHX1600C9D3K3/6GX 1600MHz DDR3 - 4GB
HD - WD Cavair Green 500 GB, 32 MB Cache
Monitor - Samsung 2233SW 22" FULL HD LD Monitor
Speakers - Edifier C3
Cabinet - CM Elite 335
PSU - CM eXtreme Power Plus 500W
It took me two days, to source all the components (they weren't readily available at Lammington Road). Corsair DDR3 1600MHz wasn't available at all so I had to go with Kingston, there too the only available kit was 6GB so I purchased two 2GB sticks from that kit.
I had to compromise a bit here and there but am happy.
Assembled the system yesterday and installed the OS. Testing is yet to be done, I think it will take another day or two.
One strange thing that I noticed was that during startup it shows memory installed as DDR3 1333Mhz (will have to check out the settings for this one) and just 2.75 GB in windows.
I am still using my earlier IDE DVDRW drive and Keyboard/Mouse.
Will get them soon (may be a Microsoft Wired Desktop 600 or Microsoft Digital Media Keyboard 3000 and Gigabyte GM 6800) and yes an extra fan for the chasis in the front.
Total Cost (till now) - 41.2K
Thanks to everyone for helping me out with this one.
I had used this thread a lot while searching a config that would suit me *www.thinkdigit.com/forum/showthread.php?t=96218
(Thanks comp@ddict, topgear and thetechshopguy)
And a very special note of thanks to desiibond for his guidance..
