CPU Fan starts and then stops then again starts after installing Corsair CX 500 PSU

pradiptakghosh

Right off the assembly line
I bought a Corsair CX 500 PSU Last week. After fitting and plugin all the cables in my CPU, I found that after switch on the CPU, the CPU fan starts and then stops at BIOS POST CODE "50" and then again starts WHEN POST CODE reaches "FF" and then continues without any hassels. It is not happening all the time. It happens only when I starts my PC after a long hour break(eg. 1st time in a day). Is my PSU faulty or is this the particular PSU feature? Because before buying this PSU, I have another PSU of Zebronics, I have never faced this situation. Your suggestion is required ASAP.
 

rijinpk1

Aspiring Novelist
what is your exact configuration? few things to do.
1) reseat ram modules and reset the cmos battery.
2)upgrade your bios.
3)smell mobo for any burned components
 

whitestar_999

Super Moderator
Staff member
it seems like bios error code '50' means cmos error.get a new one just to be sure(it is a big button size cell & cheap local one costs ~Rs.50).
 

sanket_cm

Right off the assembly line
As Whitestart_999 suggested get a new battery for the BIOS. IT's a small button cell. If that doesn't solve your problem then there is some problem with some capacitor on your motherboard particularly if it's a old motherboard. As capacitors age you will notice this problem more often.

Regards

Sanket
 
OP
P

pradiptakghosh

Right off the assembly line
Finally I talked to Corsair Guys. My Mobo is actually controlling my PSU fan. So I disabled fan controls from motherboard BIOS. Now no more CPU fan stopping. Thanks all for your concerns and replies.
 
Top Bottom