computer not switching on

Status
Not open for further replies.

abhiram2020

Right off the assembly line
help me guys....
when i switch my comp,the cpu is getting switched on but it is giving a beep sound but the monitor is getting switched on.. i think it is a ram pblm.. i even cleaned the ram slots and the ram with a cloth but no use.....
 

nach p

Journeyman
Is it a one long beep?
Try to clean the carbon layer with rubber If it doesnt work then you can try u r friends ram on ur pc or vice-versa.
 
OP
A

abhiram2020

Right off the assembly line
when i switch on my comp... not a long beep but it comes 3 times like this.....beep beep..........beep beep...............beep beep............... i cleaned the carbon layer of my ram with rubber also... but it is not getting switched on... plz help me
 

::vicky::

In the zone
how many beeps are there if u r getting one long beep then either the ram is gone or the ram is not seated properly
 

nach p

Journeyman
3 short beeps 64k Ram failure.So it is to be a memory error.Try to seat your ram properly ,and check in your both (generally 2 slots)slots.
Have u checked anothe working Ram in your PC or your Ram at any other PC.


Download memtest86 from *www.memtest86.com/
and check your memory.
reply
 
OP
A

abhiram2020

Right off the assembly line
i placed my ram inmy freindscomp... it is working... and alsoiplaced his ram...but this time nobeeepand also comp did not get switched on
 
Status
Not open for further replies.
Top Bottom