Access other's computer using a gussed I.P. (Bsnl dataone.)

[tharun518]

I could access other's computer using a gussed ip.
I went to a site to know my i.p. Then i paste my i.p on address bar. The modem site of my open. Then I tried changing the i.p this way
If my ip is
59.xx.33.172/
Changed to 59.xx.33.179/ failed
59.xx.33.180 failed
59.xx.33.175 worked
opened a modem site same as my. Then I check the username it was different. So i came to conclution that i access some ones modem. I could restart the modem and do what ever I could to my modem.
But next day when I tried to do with the same ip cant. But when i tried with ip similar to my it worked. All modem site i access was of the same modem wa3002-g1(UT Starcom). Please post reply.

 

[Quiz_Master]

No it wont work.
It will ask for Web-Admin password....

And you should not talk about hacking in any way here...

 

[24online]

i accessed many routers like that some months ago... but its just wasting time...some r admin/admin based...u can change settings... but its no use...

 

[~Phenom~]

Whats the procedure to change the password of Huwaeii smart ax MT882. I have tried entering my IP in mozilla firefox but its not working , it says page cannot be displayed.

 

[praka123]

192.168.1.1_________> enter this ip.
username:admin passwd:admin
stop ur firewall(not to be online with internet) if ur in Linux;sometimes it wont even allow.

 

[~Phenom~]

^^I have entered this ip into my browser and tried both online and offline and both with firewall on and off but nothing is working. Can u guess whats wrong ???

 

[praka123]

ur lan card needs to be set with ip's.if u use Linux,there is utils available in menu>system>network.
In ubuntu,menu System>administration>network
set ip addrs as 192.168.1.2
subnet mask:255.255.255.0
gateway:192.168.1.1
restart networking
in terminal, sudo /etc/init.d/networking restart
If u use windows xp,goto start menu somewhere to get networking page.configure LAN-in tcp/ip section enter as above.

 

[~Phenom~]

^^thanx a lot , it worked now. Now , should I change the password or both uname and passwd ???

 

[praka123]

^^ I dont have my passwd changed in GNU/Linux,change it if ur still using windows os to something else.use good firewall for windows.dont use native win xp firewall,use something like comodo firewall etc(now am forced to use windows xp dude!ofcourse what's harm in learning another OS,eh? )

 

[~Phenom~]

I have done this in Linux Ubuntu Edgy.I coudnt find and do it in Windows. Why u havent changed it in linux ?? Is it not required to be changed in linux ??? i use McAfee security suite in XP , is that sufficient ????

 

[praka123]

I think no problem of this in a proper firewalled Linux.use "lokkit" install it from synaptic manager.open a terminal and run "sudo lokkit"-this way u can customise security.
later u can view the firewall rules by "sudo iptables -L".
Dont know much about windows.from the posts above,it seems all vulnerable users most are using windows xp?
wait:setting local IP in win xp:

[FONT=Arial, Helvetica][SIZE=-1]Determine the TCP/IP settings of each computer on the local area network. In XP, open the Network Connections folder, right click the LAN connection, and browse to tcp/ip properties.then set as in earlier post.[/SIZE][/FONT]

 

[~Phenom~]

^^ok thanx a lot buddy.

 

[Desi-Tek.com]

edited (hacking any id is not good as people pay for it. )

Desi-Tek.com

 

[praka123]

ur hacking ur forum user's ?pity then .

for users knowing CLI,
make sure port 22 is blocked.
or try telnet/sshing to 192.168.1.1,if it refuses i think ur secure.

 

[Desi-Tek.com]

edited (why the hell i'll use member ip to access their router it can be done with port and ip scanner? )
those who are concern about their bsnl id and password are adviced to use bridge connection or use good firewall

 

[~Phenom~]

^^what is bridge connection and how is it more secure ???

 

[praka123]

^^ it dont carry ur dataone username and passwd,ie ur configuring inside OS.
if u use router ppp,if someone gets inside router-they can get ur passwd and username either its encrypted or what.

I think even with fire-walls if someone can telnet into ur router-if ur using ur router in "ppp" mode-god knows what else happens

 

[~Phenom~]

^^still not clear ,anyway thanx for taking pain to explain.

 

[praka123]

^^ simple.do u used Linux/Windows setup to have dataone configured?iee by giving username and passwd.if yes,no probs(bridge mode)
if u got ur dataone username and passwd configured from within 192.168.1.1 it seems dangerous for me (ppp mode of router)

 

[~Phenom~]

^^In Xp ,I always enter uname and passwd and then connect . In properties , it says is pppoe connection to broadband.

and in Linux ubuntu edgy ,i use sudo pppoeconf and configured to start net at boot time. So when i switch on my pc , net is already connected .

In which case I m using bridge mode and in which not ????? and how to do it if i m not using bridge mode ??

Sorry for troubling u again and again , but i m a dumbo.