A good AMD motherboard witg onboard graphics

[dOm1naTOr]

As for cab, go for Zebronics Antibiotic. It really rocks. It cames with a transparent side panel nd 3 LED fans nd there is a blowhole on the top which u can open if temp gets above limits nd it starts the fan(only when its open). It sturdy built and also got temp displays on fronts and comes at somewhat cheaper rate of 2~2,2k.
As bout PSU, dun go for high end, Antec 350w or any local(like intex)450w would do the job or even zebronics 400w or 450w is good. Dun waste money on xpensive PSUs if u aren't going for more than 2optical drives+2HDD+high end G card. As bout ur config even 400w PSU could easily handle it like a piece of cake.

 

[montylee]

So, i guess the best Case is from Zebronics and best PSU is from Antec.

Please suggest a good Cabinet+PSU combo (Zebronics+Antec) for around Rs. 2000, so that i can finalize my whole PC configuration.

Exact models and prices of the above would be of great help.

 

[paul_007]

is the onboard grafix per formance of intel 945 and 975 chipsets better than MSI RS482M4-ILD and Asus A8N VM CSM?

 

[dOm1naTOr]

Not better in perfomance, but 945 nd 975 supports HDTV nd also supports Vistas transperencies and all. So better future proof but low on game perfomance.

 

[teknoPhobia]

Rite now, the 6100/6150 based boards, namely here the A8n VM CSM have the best onboard graphics which fully support Dx 9.0c as well as HDTV output, and in any case they are targeted at different processors that the intel 9xx boards, and you won't get an Antec PSU within your budget 92k) let alone a cabinet as well

 

[dOm1naTOr]

@ teknoPhobia
i knew dat 6150 supports HDTV but it won't support vista fully as 945 or 975 do.As bout AMD only way foe full vista support is to get a 7300 or x1300 cards which could again cost around 5k.

 

[montylee]

Re: A good AMD motherboard with onboard graphics

Being a die-hard GNU/Linux user i don't think that i am concerned whether my PC will be compatible with Vista or not.
Most of my PC's components are finalised except the PSU and Cabinet.
PLease help me in selecting this...