1. nac

    8-pin PSU in 4-pin motherboard

    I guess I am good to go with this 8 (4+4)-pin ATX12V, EPS connector (Antec VP450P) and connect it in my motherboard (Asus P5G MX) which has only 4-pin. There is no manual with this PSU, they just supplied a leaflet which contains general info of the product. And they don't have any detailed...
  2. RageshAntony

    Please suggest a good motherboard with 3 x 4-pin system fan connectors with Intel LGA 1150 socket

    Please suggest a good motherboard with Intel LGA 1150 socket in form factor ATX or micro-Atx below Rs.6000 It must have 1) 1 X PCI Express 3.0 slot (i dont and never need any additional pci types[x4,x1 ,old pci] slots. ) 2) atleast 3 x 4-pin system fan connectors 3) 2 and above usb 3.0...
  3. ramakanta

    HDD Extra Pin Interface ???

    I have 2HDDs here with me , Hitachi 250GB, SEAGATE 500GB. from 2 different manufacturers, and all of them have the following 2 & 4-pin extra interface beside the SATA connector. what does it works for ??? Hitachi - there is only 2-pin Seagate - there is only 4-pin
  4. avinandan012

    3-pin/4-pin mobo headers male & female

    Can anyone tell me where I can buy 3-pin & 4-pin fan headers both male & female connectors?? Any DIY shops ??
  5. koolent

    Spinned with a Case fan..

    Hi, i HAVE THE " MS-7525 (Boston) " Motherboard and I can find only one fan slot occupied by the CPU Heatsink Fan.. I need to know if I can install more fans on the cabinet I am going to buy using the same motherboard.. I cannot find anymore 3-Pin or 4-Pin Connectors.. Neither any other slots...
  6. assasin

    4-pin ATX to 8-pin EATX connector

    my mobo Asus P5B Dlx has the newer 8-pin EATX connector but my new psu CoolerMaster Extreme Power Duo 650W has the old 4-pin ATX connector.so i made a 4-pin ATX to 8-pin EATX connector fro myself.i've seen pics of 4-pin molex to 8-pin EATX connector on the net but i havent seen any pics of 4-pin...
  7. W

    Cabinet Fan - Extra 4-pin connector ?

    Hi, My cabinet came with a fan fixed at the rear, in the space below the SMPS. This fan does not have the 3-pin connector of the type needed to get power from my ATX motherboard, and would need to be powered by the SMPS. For power, there are two wires (red and black) extending from the...
Top Bottom