Wierd Internet Connection Problem

[s18000rpm]

i've to do this everytime, after restarting modem, to browse.

(step by step process )
=> 1)
*s2.supload.com/thumbs/default/1-20080222075402.jpg

=> 2)
*s2.supload.com/thumbs/default/2-20080222075402.jpg

=> 3)
*s2.supload.com/thumbs/default/3-20080222075403.jpg

=> 4)
*s2.supload.com/thumbs/default/4-20080222075404.jpg

=> 5)
*s2.supload.com/thumbs/default/5-20080222075404.jpg


i'm on Vista, experiencing this problem since yesterday.
no software/driver installed/un-installed since weeks.

i'm using WiFi Modem (UT STAR WA3002G4).

happens on desktop (connected to modem with cable), laptop (wireless) not affected.

 

[slugger]

do u remember wat was it that u did b4 u started facin this proble - some changed router settings?

c if this helps Vista Ultimate loses internet connection

 

[s18000rpm]

well, i did configure the router, but after that it was working fine.

do i have to put something in that box?
[Configure the second IP Address and Subnet Mask for LAN interface ]

*s2.supload.com/thumbs/default/1-20080222120102.jpg

What the BSNL noobs did was create a Dial-up in Windows, which created a problem - at the same time Desktop & Laptop cant access internet.
this is why i configd the router, (put the IP addrs, user name & p/w)


i'm fed with this crap.

should i delete the networks or reset the router?

 

[debsuvra]

@S18000RPM, Are you using McAfee Suite or Comodo firewall 3 ? These things are bound to create errors in Vista.

I was also facing the same problem with the same modem you have for BSNL BB. It is the firewall that is not setting access to the all computers connected with 192.168.1.1. I can discuss it further but first you confirm if you have the quoted security programs.

 

[s18000rpm]

no, i have KAV, & use it once in a while.

firewall - windows .

 

[slugger]

AV shudnt cause any problem

try disablin ur firewall and c if it helps

 

[s18000rpm]

ya, just did, let me check.

 

[debsuvra]

AV shudnt cause any problem

try disablin ur firewall and c if it helps

It is confirmed that McAfee engine CAUSE some problems in Vista networking. Google for it and check.

@s18000rpm, I think u do not have to change some port settings if the same settings work in Windows XP.

Check if the Local Lan Connection is fully enabled to use all the computers connected in that network.

 

[s18000rpm]

nope, disabling the f/w didnt help.

@s18000rpm, I think u do not have to change some port settings if the same settings work in Windows XP.

Check if the Local Lan Connection is fully enabled to use all the computers connected in that network.

didnt understand

btw, that guy made that dial-up connc. in Vista only.

 

[slugger]

take a look at this

it has the configuration of mulit-user configuration of UT STAR WA3002 G1

*www.calcuttatelephones.com/dataoneinstall/mu08.html

 

[debsuvra]

didnt understand

I meant that if the default router settings work on XP then it will work fine without any changes in Vista, you do not need to change the router settings at all.

Also disable IPv6 and retry. IPv6 could be the culprit.

 

[s18000rpm]

whats WPA Pre-Shared Key?

*s2.supload.com/thumbs/default/2-20080222125752.jpg

do i have to enable it & set it as active?

 

[debsuvra]

whats WPA Pre-Shared Key?

It is a preset key that is distributed to the users of Wi Fi equipments to securely join in a Wi Fi network with the key as password.

But it is not needed on PPPoE connection like BSNL BB. It is meant for Wi Fi only.

 

[s18000rpm]

I meant that if the default router settings work on XP then it will work fine without any changes in Vista, you do not need to change the router settings at all.

Also disable IPv6 and retry. IPv6 could be the culprit.

default router setting = i've to use dialer.
i want always ON connc.

btw IPv6 is disabled in router page.

It is a preset key that is distributed to the users of Wi Fi equipments to securely join in a Wi Fi network with the key as password.

But it is not needed on PPPoE connection like BSNL BB. It is meant for Wi Fi only.

but is it useful for making this BB connc. secure, i mean what if someone else wit a laptop access my connc. i'm on h500 plan

 

[debsuvra]

Lets clear somethings, s18000rpm.

First of all there are IPv6 support in Vista. And to disable the OS support for IPv6, go to Network and Sharing Center, go to the broadband connection panel there and select 'view status', then select properties and after that select Networking tab. From the list there, please uncheck IPv6 and click OK. These will disable the IPv6 in Vista.

You are using Hamachi for some reasons as I see from your N&S Center screenshot. But I cant see the Local Area Connection there. I think LAN is not properly configured in your machine as well. Also the broadband connection should be on a Private Network for enabling all the ips on the same network.

See my screenshot for a working connection in Vista : *img185.imageshack.us/img185/1060/nscenterob7.th.jpg

I am confused with your options as I do not understand if you want a internet connection via Wi Fi or PPPoE. Please clarify them.

 

[s18000rpm]

thanks.

disabled IPv6.
hamachi (LAN over internet), i'm using it for gaming .

on desktop, i want PPPoE (as no wi-fi in desktop).

i'l be more clear.
As i have desktop & a laptop, i want to config the router as such that only these two (desktop & laptop) can access internet thru it. [laptop via wireless]
say if some guy comes with his laptop, he shouldn't be able to connect to this router.

I think LAN is not properly configured in your machine as well.

i guess so. but i dont know what happened, i didnt mess with LAN things on PC apart from giving the IP addrs, DNS... in WIndows.

 

[debsuvra]

say if some guy comes with his laptop, he shouldn't be able to connect to this router.

Then you have to select a pass key for your Wi Fi router and Laptop. It can be done via router settings page on 192.168.1.1

i guess so. but i dont know what happened, i didnt mess with LAN things on PC apart from giving the IP addrs, DNS... in WIndows.

I am curious because LAN connection should appear on the N&S center. Which LAN card are u using ? Is it a onboard one ? Uninstall it via Device Manager and reinstall. You should get a confirmation window saying that Windows has found a new network. Assign private network to it. Then select 'Setup a new connection' from N&S center and you will find the only option to be a PPPoE if u do not have some dial up modem installed. Set up the PPPoE and connect using it. After connecting successfully, windows will also ask for confirmation to set up the Network type. Select private (Home or Office) from there.

Now go to start menu>Network and there you can add a wireless device from the top menu. Add your Laptop from there and share the connection.

Also as you are wanting a Always on connection from DATAONE, u have to make some changes in the router page. Check in the internet tab on router config page and select the connection as PPPoE from Bridge Mode. Enter ur username and password and save the settings. Now u can have the always on internet by just switchin on the router. The bridge mode is used to connect to internet when the connection is triggered from Windows.

 

[s18000rpm]

the problem got solved (i guess), i changed the network type to Private & now i didnt have to go through that process.

well right now, i'm d/l a rapidshare file, after it gets d/led, i'll re-install the Onboard LAN. (btw, Vista itself installed this LAN card's drivers (Intel Gigabit LAN)

----------

*s2.supload.com/thumbs/default/4-20080222140912.jpg

whats this?

 

[debsuvra]

the problem got solved (i guess), i changed the network type to Private & now i didnt have to go through that process.

I am also happy to hear it. I hope my little help proved helpful for u


BTW 6to4 is a IPv6-to-IPv4 conversion layer very closely related to ISATAP. If you are not using IPv6 communications across IPv4 routers, you do
not need 6to4 enabled. You can safely ignore the error messages there.

 

[s18000rpm]

thanks a lot guys.

i'm sleepy now, i'll re-install the LAN card 2morow, what if something goes wong now, i'm not in mood to sit & rectify it

btw, now after re-connecting two times, i didnt have to log-in again in Digit, usually i'm logged out when nodem is re-started.