Want to Overclock AMD Phenom II x4 810 on stock cooling


In the zone
Never tried this kind of stuff, but I wanted to see how far I could push my Phenom II X4 810 without significantly shortening my CPU's life span.

How far could i get it on stock cooling without adding extra voltage? at present it is AMD Phenom II X4 810 @ 2600 MHz.

stock cpu vcore ( under load ) : 1.280v
idle cpu temp : 38.6c
Idle cpu voltage : 0.992v
load cpu temp : 46.9c

1. I've a Corsair vs450 P.S.U
2. I'm running on air cooling (Antec A30 CPU Cooler )
phenom II X4 810.jpg
phenom II X4 810 PC.jpg
Last edited:


In the zone
I used CV650 PSU and AMD auto over clock utility for Pre Ryzen CPUs (Venom II x4 810), and Catch Fire near North bridge Heat Sink of ga78lmt-usb3 6.0 Mobo


Super Moderator
Staff member
Now New Mother board

Still want to OC ? Follow this :

PS : Don't OC in huge steps .. increase processor speed by 100 Mhz each time and check for stability using Cinebench for Linx. Leave the cpu vocore / voltage setting to auto. Once the system becomes unstable back down by 200 Mhz and your OC shall be stable enough.
Top Bottom