Suggestions for setting up wired & wireless MTNL ADSL broadband.

[sandynator]

Currently using MTNL ADSL broadband & I will be transferring the same connection to our new home.
I have laid D Link Cat6 cable for MTNL telephone line from main MTNL Box of the society to our flat & also ran Cat6 cable to both bedrooms & living room for wired internet purpose.

Now I have following queries so please guide me.

1. The main MTNL box is placed just outside Electric meter room & builder has passed all telephone & intercom wires through plastic pipes from electric meter room while the cat6 cable which I have ran is open. I want to know if there will be any disturbance in telephone line if its passing through electric meter room.
What precaution should I take to avoid noise in line? Can reroute the wire from outside but do not find it to be secure enough.

2. Is length of cat6 wire major issue for telephone line as well as internet line in house from ADSL router modem?
Our flat is on 9th floor & used almost 45 - 50 metre cable for telephone line while within the house used at the most 20-25 metre cable used for wired net.

3. Should I crimp RJ45 Cat6 connectors on both end of the cable making it patch cord for wired net or use RJ45 Cat 6 Jack from Anchor Roma /GreatWhite in between?
Using Cat 6 RJ45 modular Jack & then ready made patch cords will look neat but no point if the internet speed gets hampered.

4. Currently using TP Link 8968 wireless ADSL router modem but planning for something powerful for wireless setup.
Suggest if there is any other powerful ADSL router modem with wide coverage OR I must get 2 separate devices i.e wired ADSL Modem & WiFi Router.
I am planning to get Philips Soundbar with wireless Subwoofer which works on 2.4 Ghz frequency so there should not be any issue of connectivity.
Placement of router modem will be centrally located in passage but signal should pass through multiple walls.
Area for coverage is small just short of 1000 Sq feet.
In future may get Jio Broadband so need to buy devices accordingly.

Please guide me

 

[hotshot05]

(Offtopic)
Can you please provide link for the Phillips soundbar which has wireless woofer?

Sent from my Redmi Note 3 using Tapatalk

 

[sandynator]

(Offtopic)
Can you please provide link for the Phillips soundbar which has wireless woofer?

Sent from my Redmi Note 3 using Tapatalk

Search for the following models under 30k

Philips Fidelio Soundstage XS 1/12
Philips sound bar htl 6140b/12
Philips sound bar htl 5160b/12
Philips sound bar htl 3140b/12


Sent from my DUK-L09 using Tapatalk

 

[whitestar_999]

I am not familiar with society setup,can you explain in more detail about it especially this "MTNL box" & telephone line coming to your flat.

 

[sandynator]

I am not familiar with society setup,can you explain in more detail about it especially this "MTNL box" & telephone line coming to your flat.

Sure.
Firstly it will be an individual connection. I just need to transfer my existing MTNL connection to this new address. Telephone exchange is same.

MTNL i.e. Mahanagar Telephone Nigam Ltd. have their boxes installed in every society building & from there every flat is provided with telephone connection through wires.
Instead of normal telephone wire from polycab I have used D Link Cat6 UTP cable. My biggest worry is that this Cat6 cable is passing through the ceiling of Electric Cabin room of the society where lots of high tension wires are passing.
The builder had made this arrangement almost 10 yrs back but he has passed all telephone as well as intercom wires from plastic pipes. I had to pass this Cat6 cable without any casing as it was very difficult to pass wire from small pipe.

Now this telephone wire comes inside the concealed board of our flat which is centrally located in the passage. Electrician has used one pair i.e. orange- white & connected it to modular RJ 11 telephone jack, from here I will use RJ11 patch cord to splitter.
My adsl router modem tp link 8968 or some other new will be mounted here. From this concealed board I have passed Cat6 cable to 2 bedrooms & living room (each is approx 20-25 metres in length) for wired line.


I hope it's clear now.
Thanks...

Sent from my DUK-L09 using Tapatalk

 

[whitestar_999]

I am still not clear,more specifically I am not getting the "from polycab I have used D Link Cat6 UTP cable.My biggest worry is that this Cat6 cable is passing through the ceiling of Electric Cabin room of the society where lots of high tension wires are passing". As I understand,from mtnl box outside society there comes telephone wire to your flat & ends in a concealed board inside your flat.Now you plan to install your 8968 here(nearby the board) & use Cat6 cable to rooms.Correct me where I am wrong.

Length of 25m is not an issue but interference from power lines definitely is.I don't get where the "ceiling of power cabin" comes into picture when considering networking inside your flat.