SSD Drive Issue: BSOD Error

[shreeux]

If you use main M.2 slot then SATA5 & SATA6 will not work.
If you use 2nd M.2 slot then PCIE2, PCIE3, PCIE4 & PCIE5 slots will not work.
That means main PCIE slot which you use to insert the GPU will work. Okay.

As per attached file...

I am using SLOT 1 M.2 for NVME SSD
PCIE 1 for Graphics Card
For 6 Sata Ports, now used Sata Port1 and Sata Port2 only

Remaing Sata Port 3,4,5,6 not used
Remaing PCIE2, PCIE3, PCIE4 & PCIE5 not used

So, can I add 1 more SLOT 2 M.2 for NVME SSD?

 

[bssunilreddy]

As per attached file...

I am using SLOT 1 M.2 for NVME SSD
PCIE 1 for Graphics Card
For 6 Sata Ports, now used Sata Port1 and Sata Port2 only

Remaing Sata Port 3,4,5,6 not used
Remaing PCIE2, PCIE3, PCIE4 & PCIE5 not used

So, can I add 1 more SLOT 2 M.2 for NVME SSD?

Yes you can.

 

[omega44-xt]

How 90TBW ?

Can I reinstall Windows 10 OS to resolve the BSOD error? OR Windows 11?

As of now, which is good one, SSD M.2 as per my motherboard?

90TBW is mentioned in your CrystalDiskInfo screenshot

 

[shreeux]

This week again, face with BSOD issues.
So, Finally bought

EVM M.2 NVMe Internal SSD (2280) - 2000MB/s Read - PCIe Interface Gen 3x4-4X Faster Than SATA SSD- 5 Year Warranty, 256GB @
1500/-

After that, install a fresh Windows 10 OS... No issues till then... Lets see

Now, Kaspersky shows good health on this drive

 

[Desmond]

That a good brand?

 

[shreeux]

That a good brand?

Its reputed only
WD has a 3-year warranty... So I blindly bought the EVM 5-year warranty.


In 2019, ADATA XPG 256GB bought at ₹5,350.

 

[shreeux]

One more doubt:

I am using Privazer software to clean and delete every single file through secure deletion... Avoid residual traces of old files remaining in free space.

www.privazer.com/en/index.php

Will it affect the SSD drive?

Is that the reason for SSD drive failure?

 

[shreeux]

Yes you can.

After PC working fine with new M.2 SSD in M.2-1st Slot


I insert my existing NVME M.2 SSD...in M.2 Slot. PC on no display in Monitor... I don't know why?

 

[Desmond]

One more doubt:

I am using Privazer software to clean and delete every single file through secure deletion... Avoid residual traces of old files remaining in free space.

www.privazer.com/en/index.php

Will it affect the SSD drive?

Is that the reason for SSD drive failure?

Could be. Technically such secure delete software work by not only dislocating the pointers for the files but also writing null or zero values over the locations where the files were.

 

[shreeux]

Again, the system lags sometimes and restarts with the default 800x600 resolution mode. Later, a few minutes later, change to 1920x1200.

How to check GPU condition?
Any software?

How to check DDR4 RAM?
Any software?

 

[Desmond]

Again, the system lags sometimes and restarts with the default 800x600 resolution mode. Later, a few minutes later, change to 1920x1200.

Looks like GPU driver issue. Which GPU?

How to check GPU condition?
Any software?

I doubt there's any. You could just uninstall and re-install your drivers.

How to check DDR4 RAM?
Any software?

Memtest86

 

[shreeux]

Looks like GPU driver issue. Which GPU?

I doubt there's any. You could just uninstall and re-install your drivers.

Memtest86

I think, as per my PC configuration, the Nvidia Geforce GT210 is not loadable in current situation

 

[shreeux]

Yesterday again, system lagging...While checking This PC....one partition not showing in WD BLUE 1TB hard disk.
After system restart and checking in BIOS....WD BLUE 1TB hard disk not showing,
So, I disconnected from my PC ... Now PC working fine... Lets see...


What to do with WD Blue 1TB hard disk...some time will work fine.,