No Display

Status
Not open for further replies.
fawazz

fawazz

Broken In
When i switch ON the main power, the system automatically starts. But there is no display and no beep. I tried changing the ram slots, cleared cmos settings. But it still does not work.
I use Pentium 4 1.7 GHz
512 RAM
80 GB HDD
845G motherboard

Waiting for reply
 
OP
fawazz

fawazz

Broken In
vimal_mehrotra said:
Did you do something(changed some setting in bios etc.) before this problem occurred.
Click to expand...

Just removed ram, checked it inserted it back. Thats all.
 
Arsenal_Gunners

Arsenal_Gunners

Human Spambot
^^After this the problem started?Hmm...If it is a ram problem there must be a beep.
Tighten all the power connectors on the motherboard,it looks like power problem.
 
nikhil ramteke

nikhil ramteke

s,b+..u cn..
try this...............

-first of all remove the connection of ur start and restart button on cpu,and again reconnetct them properly,now remove the cmos battery and jumper beside of that....
 
A

Ace Ventura

Broken In
HI,

I had the same problem for 2 weeks and i could not figure out what went wrong

this happpened after enabling some settings in BIOS

so this was what was suggested and it worked

Hi codename_romeo ,


Thanks for the resolution.

Though I thought about removing the CMOS battery and putting it back i was not sure about doing it will resolved the issue

But after ur suggestion i removed the battery and also swapped the CMOS jumper and restarted the computer

It worked absolutely fine

Thanks a lot
Appreciate it

Cheers
Ace Ventura
 
Status
Not open for further replies.
Top Bottom