Meaning of the BEEP Sounds in PC

Status
Not open for further replies.
ERROR CODES IN A PC

One Beep :
Quote:
DRAM refresh failure
This may be due to - Bad memory chips
- A bad DMA Chip
- Bad memory addressing chips on the motherboard


Two Beeps :
Quote:
Parity error or Parity Circuit failure
Your memory may not be seated properly on the mother board.
Unplug and plug it properly


Three Beeps :

Quote:Bad memory or bad mother board


Four beeps :

Quote:Timer failure in the RAM.


Five Beeps :

Quote:CPU chip may be dead


Six Beeps :

Quote:Keyboard controller may have failed


Seven beeps :

Quote:CPU is dead. Retry the connections and test.
Replace the whole motherboard.


Eight Beeps :

Quote:Video card is missing or Bad.


Nine Beeps :

Quoteamaged ROM BIOS. BIOS chip has to be replaced if it persists.


Ten Beeps :

Quote:CMOS shutdown. Replace CMOS memory and associated chips.


Eleven Beeps :
Quote:
Cache memory test has failed.
To enable cache memory try CTRL+ALT+SHIFT++.


One long Beep and Three short Beeps:

Quote:Memory failure


One long Beep and Eight short Beeps :
Quote:Video card failure. Try to install video card in another slot.


No Beeps :
Quote:Check Power supply
Check mother board connections
Remove all cards except video card and check for system power up
Insert all cards one at a time and check their operation.
If system hangs on the installation of a particular card, then it is the cause for the problem and replace it with another of that type and check
 
Status
Not open for further replies.
Top Bottom