quicky008
Technomancer
I recently purchased an used core 2 quad Q9400 cpu from ebay.Upon receiving this cpu i examined it closely and discovered that the cpu might be damaged.What i found particularly odd was that the one of small structures at the underside of the cpu is affixed at a diagonal position,which is very strange to say the least.Usually they are set either horizontally or vertically but never at an unusual diagonal position(please refer to the attached images).It seems somehow it has broken off from its actual point of soldering and is thus stuck askew at a position where its not supposed to be.
Also i found what appears to be the residue of some thermal grease like substance at the middle of the chip(on the contact pad at the bottom).So it seems the seller has deliberately sent me a defective cpu.I haven't installed it on my motherboard as i am afraid that i might end up damaging it if i attempt to install such a faulty cpu.So can anyone check the photos and tell me whether my suspicions are correct or not ie is this indeed a damaged cpu?Should i return it and try to obtain a refund or replacement?Please advise-this really worries me as i spent around Rs 1500 on its purchase and i think the seller might have given me the shaft with this one!
Also i found what appears to be the residue of some thermal grease like substance at the middle of the chip(on the contact pad at the bottom).So it seems the seller has deliberately sent me a defective cpu.I haven't installed it on my motherboard as i am afraid that i might end up damaging it if i attempt to install such a faulty cpu.So can anyone check the photos and tell me whether my suspicions are correct or not ie is this indeed a damaged cpu?Should i return it and try to obtain a refund or replacement?Please advise-this really worries me as i spent around Rs 1500 on its purchase and i think the seller might have given me the shaft with this one!
Attachments
Last edited: