Help in OVERCLOCKING

Status
Not open for further replies.
pirates1323

pirates1323

In the zone
I have pentium 1.6 ghz.. and 32mb SiS card and 128 Mb ram, I want to tweak my whole system... specially my.... SiS card which just sucks..................
 
OP
pirates1323

pirates1323

In the zone
rajkumar_personal said:
So where can we all help u ?
Please specify details enough for us to understand ur prob and give u a specific problem !
Click to expand...

No. prob... just wanna tweak to check its power to its edge
 
A

amitsaudy

Ambassador of Buzz
He asked for details dude.
I mean u specified Pentium 1.6 ghz & 128 mb ram.
But mobo chipset/Brand/SD or DDR ram etc.
N the task ya want to tweak ur system for.
Eg: For gaming,multimedia,image processing,cd writing etc.
 
OP
pirates1323

pirates1323

In the zone
amitsaudy said:
He asked for details dude.
I mean u specified Pentium 1.6 ghz & 128 mb ram.
But mobo chipset/Brand/SD or DDR ram etc.
N the task ya want to tweak ur system for.
Eg: For gaming,multimedia,image processing,cd writing etc.
Click to expand...

yes sd ram and for gaming and wht is mobo chipset and which brand :roll:
 
OP
pirates1323

pirates1323

In the zone
Hello anyone here can listen em''' I wanna just overclock my processor, ram and that sis card

128 mb sd 133 mhz
1.61 processor intel
32 mb sis card 125 mhz..
 
R

rajkumar_personal

Ignorance is BLISS !!
BINGO !!!!!!!!

That was the thing that DIGIT gave us for the Take-A-Crack section some time ago !!!

If U got the DIGIT editions for the previous or the month before, you can check it out there !!!

But hey dude,
It is risky and plz do it on ur own acount !
 
I

icecoolz

Cyborg Agent
first of all this is in the wrong section. Overclocking is a H/W issue so needs to be in the H/W section. Second you havent provided enough information for overclocking. You want to over clock there there is a sticky in the H/W section about overclocking so read that first. No ones gonna be able to help you till you provide adequate information mate.
 
OP
pirates1323

pirates1323

In the zone
Ok this will be enough info

CPU:

Processor
Name: Intel Pentium 4
Code Name: Northwood Brand ID: 9
Package: mPGA-478
Technology: 0.13µ Voltage: 1.472 v
Specification: Intel® Pentium® 4 CPU 1.60GHz
Family: F Model: 2 Stepping: 4
Ext. Family: 0 Ext. Model:0 Revision: B0
Instructions: MMX, SSE, SSE2

Clocks

Core Speed: 1614.4 MHz
Multiplier: x 16.0
Bus speed: 403.6 MHz

Cache:

L1 Data: 8 Kbytes
L1 Trace: 12 Kµops
Level2: 512 Kbytes


Motherboard:

Model: i845-ITE8712
Chipset: Intel i845 Rev. A3
Southbridge: Intel 82801A (ICH2)

BIOS

Brand: Award Software International, Inc
Version: 6.00 PG
Date:02/06/2002

Graphic Interface:

Version: AGP version 2.0
Transfer Rate: 2x Max. Supported: 4x
Aperture Size 64 Mbytes
Side Band enabled

Memory:

Type: SDRAM
Size: 128 Mbytes

Timings:

Frequency: 134.5Mhz
FSB:DRAM: 3:4
CAS# Latency: 3.0 clocks
RAS# to CAS# Delay: 3 clocks

Cycle Time (Tras): 7 clocks


Memory Slot Selection:

Slot #3: SDRAM
Module Size: 128 Mbytes Correction: None
Max Bandwidth: PC142 (142 MHz) Resgistered: no
Manufacturer: 0000000000000000 Buffered: no


SPD Timing Table:

Frequency: 142 MHz
CAS# Latency: 3.0
RAS# to CAS#: 3
RAS# Precharge: 3
Tras#: 7


Now tell how to overclock
 
I

icecoolz

Cyborg Agent
dude. u need to calm down and wait for people to read and see if they can help. First of all did you read up on overclocking like I said in the other post ? COs if you dont know what ur doing u'll end up frying ur mobo and ur cpu! So read up on it first mate.

Second ur motherboard is an obscute one and as far as I know will not support over clocking. So basically that leaves no option for you to overclock. I could be wrong. Wait for others to post and see.
 
I

icecoolz

Cyborg Agent
that can be only done if the motherboard supports FSB change or multiplier changes on your BIOS of your motherboard. Check and see in your if these options are enabled or not. If not then you cant OC.
 
Status
Not open for further replies.
Top Bottom