Current on Cabinet

Discussion in 'Power supply / Cabinets / Mods' started by mati17, Feb 12, 2018.

  1. mati17

    mati17 All Prez to The Almighty

    Joined:
    Jan 23, 2006
    Messages:
    78
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    New Delhi
    Hi Forum !

    Recently, I shifted to new flat. After installing my pc, there is current on Cabinet though very low like vibration.
    There is also some image distortion on my LED monitor.

    What's the problem, I couldn't understand.
    Kindly suggest the remedy.

    Thanks & Regards,

    Matin





    Sent from my SM-J710FN using Tapatalk
     
  2. Xai

    Xai Member

    Joined:
    Apr 2, 2012
    Messages:
    165
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Kolkata
    do call your local electrician and have the earthing checked.
     
  3. patkim

    patkim Active Member

    Joined:
    Mar 5, 2005
    Messages:
    781
    Likes Received:
    39
    Trophy Points:
    28
    Location:
    Mumbai,Pune
    Along with checking for faulty/open Ground, also if you are using any surge protectors/extension boxes etc between PC & mains, remove them and plug the PC directly to walls sockets and check again.

    Try connecting the PC to another wall socket in another room as well and check.

    Does your PSU come with 2 pin or 3 pin plug?

    Better use an electrical tester before touching cabinet in such a case. If the tester LED glows you have noticable voltage on the cabinet.
     

Share This Page