ASUS EAH5670 1GB on Biostar G41D3G hangs on POST

A

ankur1234

Right off the assembly line
I have a Biostar G41D3G motherboard and 2GB DDR3 1066 MHZ Ram.
I recently purchased a ASUS EAH5670 1GB.
The processor is Intel E6550 @ 2.33 GHZ with stock cooling
I also Have a 450 Watt PSU.
The Problem is that on attaching the graphic card to the motherboard on booting the system hangs on POST most of the time. if it does successfully boot then on entering OS(Windows 7) the driver stops responding and also while just looking up the bios the display is not stable
i have tried the same configuration with a Nividia 8600GT which works just fine
if i remove the asus card the system works just fine...
i have also tried 550 watts PSU but the problem exists...
pls help me solve this problem
 
Jaskanwar Singh

Jaskanwar Singh

Aspiring Novelist
^he has mentioned 8600gt runs on his psu. psu change not a solution imo.

@op
tried driver reinstall? install them from amd website after completely removing current ones.
 
Last edited:
J

Joker

Guest
try to upgrade ur bios.

get new bios from ur manufacturer's site
 
You must log in or register to reply here.
Top Bottom