Recent content by karthik316_1999

The Acer would have been a very good choice but since I wasn't sure if the old stand could be used on it.. settled with the Benq2490T..

Settled with the AX53 and happy with the purchase..

Thanks for the suggestion..! I was just considering the Benq GW2490T @ 10.5k (mainly for its eye care technology and the adjustable stand that comes along with it..) Let me also take a look at the specs of this Acer and decide.. Thanks again :)

1. Budget - Depends upon answer to question 7 since I need these features and not sure of the price range 2. Display type and size - IPS matte monitor, 24" (reflective screens to be avoided) 3. What will the TV/monitor be used for primarily - office & multimedia 4. Types and number of ports...

Yes, my initial problem was with the Wifi drops.. So, I connected the laptop via LAN to check if that solves the issue but then I encountered the above issues even on a LAN connection.. hence, thought of highlighting here just to let you know that the router is not able to produce 100 mbps even...

Just had my 2nd router configured in AP mode.. but sadly that did not give me increased speeds.. speedtest by connecting my personal laptop via LAN did not cross 75 mbps.. Tried connecting the LAN cable from the 1st router directly to the laptop bypassing the 2nd router and the speed was still...

It seems I can use the same WiFi SSID on both the routers when the 2nd router is configured in AP mode.. Is this correct? If so, how will I know if the devices are connected to the 1st router or the 2nd one? Also, 1 last purchase question please.. Is it worth paying extra for a Dual band...

Can it be said that a second router connected via Access Point mode will function more efficiently when compared to whatever method that I have currently configured?

Thanks much for your response :) The 2nd router in the 1st floor (the old one) was restored to factory settings by the installation personnel at the time of obtaining the connection just about a couple of weeks back.. Further, I have verified that the firmware in use is the latest one offered...

This is exactly how the current configuration already is ! where-in the Wifi is unstable.. I guess its time I let go of my old router and invest in a new one to solve the issue .. Can I get recommendations for a good WiFi6 router from tp-link? The shortlisted models include Archer AX10 and...

oops.. did you mean connect the 2 routers in the LAN to LAN configuration.. I thought you suggested that I connect the computers to the router via a LAN cable instead of using WiFi.. I do not move the routers around but the laptop needs to be moved around the house anytime.. Now that you suggest...

This did not solve the problem unfortunately..

The setup was done by the ISP guy.. I did tell him about my previous LAN to LAN setup but he said they usually follow the LAN to WAN setup only.. The channel on both the routers was set to 'Auto'.. Let me change this to '1' on the Archer and '6' on the old router and observe..

LAN cable isn't an option unfortunately since I need mobility with the laptop moving around the space... Is it true that the Wifi light on the router needs to be constantly ON without blinking? Also, what's the difference between connecting the primary router to the secondary router via the...

Instead of bringing the work setup downstairs, can I do the test by swapping the router's position? (Old router in the ground floor and the Archer in the 1st floor) If so, do I need to change any settings within the routers? Also, I do not use any LAN cable at all.. The office setup is connected...