4x8gb DDR3 memory supported Motherboard

billamama

In the zone
I had the following PC config

GA-78LMT-USB3 (rev. 6.0)
Phenom II X4 810
32gb DDR3 Ram ( 8gb x 4 )
GT-710 2gb DDR5
2 HDDs
2 SSDs
CORSAIR CV650


I tried to overclock the CPU with AMD Overdrive Utility to get something more from it, on Cooler Master Hyper H410R (RR-H410-20PK-R1) 120mm, and I burnt the Motherboard near North Bridge Heat Sink

is it possible to get a working AM3+ Mobo from anywhere? Its urgent
 

chetansha

In the zone
Am3+ boards really hard to find. You can try olx , but try ro collect in person.
I found one on olx, m5a88, the seller did not pack it properly and it got damaged in transit.
 

nac

Aspiring Novelist
I had the following PC config

GA-78LMT-USB3 (rev. 6.0)
Phenom II X4 810
32gb DDR3 Ram ( 8gb x 4 )
GT-710 2gb DDR5
2 HDDs
2 SSDs
CORSAIR CV650


I tried to overclock the CPU with AMD Overdrive Utility to get something more from it, on Cooler Master Hyper H410R (RR-H410-20PK-R1) 120mm, and I burnt the Motherboard near North Bridge Heat Sink

is it possible to get a working AM3+ Mobo from anywhere? Its urgent
Hey! You can't get a motherboard just because it supports 4 x 8GB DDR3 and pair it with your other components. You should get a compatible motherboard. What's your system configuration, esp. the processor you have? Without knowing that, can't suggest "a" board for you.
Okay, is this the one you were asking for?
If so, no I don't know where you can get a new/used board that is compatible with your CPU. Try sites like OLX as already suggested.

If that doesn't work, get an old Intel CPU for sub 1k, cpu fan for about 250/- and get a compatible board which also supports DDR3 sticks. But I don't know if you can find a board which can house 4 ram sticks, sure you can find board with two ram slots. Try your luck. All this will cost you about 3.5k max.
 

nac

Aspiring Novelist
Obviously, the old Intel CPU I said is not gonna be as powerful as your existing CPU and finding an old board that has four ram slots is near impossible. If you are trying to get a working rig, this is the cheapest option. If money is not an issue, ditch this combo and go for the lastest available parts. You have pretty much everything else, all you need is CPU+BOARD+RAM.
 
OP
billamama

billamama

In the zone
Okay, is this the one you were asking for?
If so, no I don't know where you can get a new/used board that is compatible with your CPU. Try sites like OLX as already suggested.

If that doesn't work, get an old Intel CPU for sub 1k, cpu fan for about 250/- and get a compatible board which also supports DDR3 sticks. But I don't know if you can find a board which can house 4 ram sticks, sure you can find board with two ram slots. Try your luck. All this will cost you about 3.5k max.
Saw this one on Amazon.in, is it ok?
*www.amazon.in/gp/product/B00CX4MUCC/ref=ox_sc_act_title_2?smid=A2GNC2PPG6BB34&psc=1
 
OP
billamama

billamama

In the zone
Not worth the price
*www.amazon.in/BIOSTAR-A780L3B-Moth...ard&qid=1638943217&sprefix=am3,aps,501&sr=8-1

it has 2 slots and supports 16gb max,
will it handle After effects / PP / Blender
if coupled with Phenom II X4 810, 16gb ram , vs450 and GT710 2gb ddr5 ?
 

chetansha

In the zone
*www.amazon.in/BIOSTAR-A780L3B-Moth...ard&qid=1638943217&sprefix=am3,aps,501&sr=8-1

it has 2 slots and supports 16gb max,
will it handle After effects / PP / Blender
if coupled with Phenom II X4 810, 16gb ram , vs450 and GT710 2gb ddr5 ?
It's your money.
20k for am3 board these boards even if imported from usa wont cost so much . For 20k you can get asus crosshair formula v z board

I sold a m4a88t-m board for 3k few months back. You can find cheaper alternatives on olx. Again it is your money.
 
OP
billamama

billamama

In the zone
It's your money.
20k for am3 board even if imported from the USA won't cost much. For 20k you can get Asus crosshair formula v z board

I sold an m4a88t-m board for 3k a few months back. You can find cheaper alternatives on Olx. Again it is your money.
No, No, I'm not talking about that 20k board it is BIOSTAR A780L3B (AM3 socket) listed for 3300 on Amazon, but supports up to 16GB ram
will it handle After effects / PP / Blender if coupled with Phenom II X4 810, 16GB ram, vs450 and GT710 2GB ddr5?
 
OP
billamama

billamama

In the zone
if your earlier board did then this will handle it. cos same chipse

It's your money.
20k for am3 board these boards even if imported from usa wont cost so much . For 20k you can get asus crosshair formula v z board

I sold a m4a88t-m board for 3k few months back. You can find cheaper alternatives on olx. Again it is your money.
well I got some AM3 board on OLX but seller were not available to answer! is it possible to get a working AM3 board with 4x8gb ddr3 support here, as you mentioned you sold m4a88t-m board for 3k a few months back.
 

quicky008

Technomancer
If you are getting new mobo on amazon then it will be a better choice than getting it from olx.

Older versions of these softwares may work without issues on this ageing platform, but the same cant be said of their latest iterations.
 
OP
billamama

billamama

In the zone
If you are getting new mobo on amazon then it will be a better choice than getting it from olx.

Older versions of these softwares may work without issues on this ageing platform, but the same cant be said of their latest iterations.
It would be great if I get one am3 socket mobo that supports 4 x 8gb ddr3, thats why I'm waiting for so long :( otherwise remaining 2 x 8gb will be wasted
 
OP
billamama

billamama

In the zone
If you are getting new mobo on amazon then it will be a better choice than getting it from olx.

Older versions of these softwares may work without issues on this ageing platform, but the same cant be said of their latest iterations.
I got a old one from OLx, GA-880GM-USB3 (rev. 3.1), It cost 3000/- + 200 courier charge, total 3200/-
 
Top Bottom