kARTechnology
Sony " VA" "IO"
Good that I didnt get this model...
Thought of getting it for my home
Thought of getting it for my home
W8968 causing some troubles.
My Firmware version is 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n and Hardware version is TD-W8968 v1 00000000
You guys all on V2?
You guys all on V2?
Yup, we all are on hardware version 2.
You have slightly outdated firmware, take a look here but if it is working fine now then I seriously don't recommend updating it.
--------------------------------------------------------------------------------------------------------
Here is a solution (courtesy of kvsandeepreddy)
reset your router.
connect to using ur default key
first go to wireless-- basic settings-- then change region to india..
then change ur ssid
put mode 11bgn mixed
channel auto
channel width auto
then manually config ur pppoe
disable everything related to usb settings.
I'm not sure but he is using it for 3 hours without any problems.
Try this also ---->
Please try to disable :
"Enable Fullcone NAT:" & "Enable IGMP Proxy:"
under : Network -> WAN Settings -> WAN Service Setup -> Advance option.
kvsandeepreddy
Broken In
yep!! i think this i a prob with v2 of this model.
im on airtel broadband and im still facing the prob so prob with bsnl ruled out
im on airtel broadband and im still facing the prob so prob with bsnl ruled out
Which one did you get?
Some cases of v1 having the same problems are also reported.
^^OK thanks for clarification. So this is the problem with V2 firmware.
Did you guys updated recently or started facing the issue suddenly.
What I mean is, did you guys started facing the problem all of a sudden and you all had V2 from the very beginning or all these started only after upgrading to V2?
Either way, I think you all need to contact TP-Link. Unless they are releasing any firmware upgrade again there's no solution.
Did you guys updated recently or started facing the issue suddenly.
What I mean is, did you guys started facing the problem all of a sudden and you all had V2 from the very beginning or all these started only after upgrading to V2?
Either way, I think you all need to contact TP-Link. Unless they are releasing any firmware upgrade again there's no solution.
kvsandeepreddy
Broken In
as previously quoted by little... ppl who r facing the prob try those steps...
dont forget to disable all the usb settings like media, storage, ftp, print.
after following those steps i m free from the prob from the past 4 to 5 hrs now
dont forget to disable all the usb settings like media, storage, ftp, print.
after following those steps i m free from the prob from the past 4 to 5 hrs now
^^Well, thanks for all the help, I guess everyone who is facing the problem with the model, can have some relief with this trick.
But I suggest all of you facing the problem to post it here => Wireless ADSL2+ Modem Routers
I guess, that would make TP-Link notice about the issue. As soon as they notice they may start debugging and work out. If no of people replies, it'd support the truth of the issue.
But I suggest all of you facing the problem to post it here => Wireless ADSL2+ Modem Routers
I guess, that would make TP-Link notice about the issue. As soon as they notice they may start debugging and work out. If no of people replies, it'd support the truth of the issue.
1st Nov - I got my modem on 1st, updated it to the latest firmware (130217), configured it and it was online.
2nd Nov - No suspicious activity detected.
3rd Nov - I had to restart the modem once on this day.
4th Nov - I figured out that 192.168.1.1 isnt loading but didnt give much thought to it as it was working after reboot.
5th Nov - FFFFUUUUUUUUUUuuuuuuucccccc*** you TP-Link
6th Nov - Today I figured out that something has to be done
so I am here.kvsandeepreddy
Broken In
@nipunb... bro did u try it???
kvsandeepreddy
Broken In
i tried registering there. i didnt get any validation email from them till now... been almost 4 hrs.. still waiting for it
They have manual moderation enabled for registration same like TDF
Wait for 24 Hours. I registered there the very first day I got my product just like that..!!
kvsandeepreddy
Broken In
as quoted earlier by me.. i ve done the same thing of disabling the usb settings.
and now its fine for me. u guys try it out and let me know
kvsandeepreddy
Broken In
They have manual moderation enabled for registration same like TDF
Wait for 24 Hours. I registered there the very first day I got my product just like that..!!
ohk .. il wait for the mail and ill open a thread there
no, I haven't tried these suggestions, currently I'm downloading a game from steam and I don't wanna interrupt it...
I'm not able to open the router page and I'll have to restart the router to open it, so, I'll try these tomorrow morning...
Here is something that I found a few days ago.
120926 on v1
EDIT: For some unknown reasons, this page isn't loading in Firefox 25.0 Try in Chrome.
Which one?? Did you guys checkout the WB Humble Bundle??
120926 on v1
EDIT: For some unknown reasons, this page isn't loading in Firefox 25.0 Try in Chrome.
Which one?? Did you guys checkout the WB Humble Bundle??
kvsandeepreddy
Broken In
lol, yeah, thats the one I bought. Out of those games, I already had the arkham asylum, but never played the others, so now I'm downloading arkham city first, maybe I'll buy arkham origins also after that...
sujoyp
Grand Master
ok inspite of all tech talks here I found under the PPOE connection in router web interface that the default idle time is just 15 minutes...thats if u keep router idle for 15 mins its gonna stop or hang ....hmm maybe it can be a reason...I changed it to 0 which is unlimited lets see if it still hangs