Router TO PC [30Meter]

[Rajesh345]

I want to connect Router to PC #2 which is around 30meter away from Router with Cat5 cable [ROuter>its Ethernet Port>Cat5(30meter) > PC's Ethernet Port)

*img38.imageshack.us/img38/7871/unledjjs.jpg

Usage = Cheap High spd data transfer b/w 2 pc + net sharing
1) I heard we can use upto 100m long cable , so is it setup ok ?
2) Is there any risk i should away when using this setup ?(other than cable management)
3) Is there any added advantage if i add switch to this setup ?
4) Which type of crimping should i used xover?


Note: Pls dont suggest Wireless card and such


Thank you

 

[iinfi]

1. 30m sud be fine. is it PC>>router>>internet and vice versa or are there other PCs connected to the router's LAN ports?
2. dont run it too close to power lines (too close = 10-12 inches)
3.no
4. use a straight cable. you local PC fellow who does networking job sud be able to help you with this.

 

[Rajesh345]

1. 30m sud be fine. is it PC>>router>>internet and vice versa or are there other PCs connected to the router's LAN ports?
2. dont run it too close to power lines (too close = 10-12 inches)
3.no
4. use a straight cable. you local PC fellow who does networking job sud be able to help you with this.

1)
a) Internet = PC ->Router>ISP
b) PC#1 is directly connected to Router with Short Cat5 cable [Router>PC]
c) PC#2 will b a Direct Connection from Router's Ethernet Port#2 to pc #2's Ethernet port [cable length =30m ]

2) Everything is done by me [only prob is i need crimbing tool

I found this guide 2b helpfull [crimbing , colour code, etc]
How to make a network cable.
*www.computerhope.com/jargon/num/586a586b.gif




Thank you again