nac
Aspiring Novelist
- Joined
- Oct 10, 2010
- Messages
- 5,345
It was working fine, I was shaking my keyboard to clean the debris. Display went off and PC restarted. I don't know if the shake triggered this issue or that is just a coincidence.
I worked for about 10 minutes, and again display went off. System is running, but no display. After couple of minutes, long pressed power button to shutdown.
I turn the PC ON, fan spinning (both CPU and PSU), keyboard light flashes. But no beep, no display and not booting.
I removed all the components out and did bench test, still the same.
Only PSU, motherboard and CPU/cooler was installed in bench test.
Tried removing CMOS battery.
Tried reset pin switch from 1-2 to 2-3.
I have tried for about 20 times since last night, still the same. Any help would be appreciated.
Here is my spec.
Intel C2D E8400
Foxin G31 board (this I bought in Mar'17 and it's out of warranty now - my guess is motherboard is the one making this issue)
Antec VP450p
I worked for about 10 minutes, and again display went off. System is running, but no display. After couple of minutes, long pressed power button to shutdown.
I turn the PC ON, fan spinning (both CPU and PSU), keyboard light flashes. But no beep, no display and not booting.
I removed all the components out and did bench test, still the same.
Only PSU, motherboard and CPU/cooler was installed in bench test.
Tried removing CMOS battery.
Tried reset pin switch from 1-2 to 2-3.
I have tried for about 20 times since last night, still the same. Any help would be appreciated.
Here is my spec.
Intel C2D E8400
Foxin G31 board (this I bought in Mar'17 and it's out of warranty now - my guess is motherboard is the one making this issue)
Antec VP450p