Intex Mic

Status
Not open for further replies.

kooladi

Right off the assembly line
hi friends,
I just bought an Intex Speaker Microphone. The trouble is while the speaker works fine, the mic picks up everything..converts into a noise..and then whilei can speak..the other person listens nothing.
I tried to play around with the settings but with limited sucess.
I have an Aureal SoundCard(thats external) and also an onboard sound card(which i dont use)
can u guys help
plz
 

q3_abhi

Youngling
Try using it on other system. If the problem persits then try another mic n see if the problem is solved.
If the mic doesnt work on other system then exchange it from where u took it.
 

siriusb

Cyborg Agent
I had a similar issue where a lot of noise is heard than voice. Mine was solved by turning off the "1 mic Boost" in advanced control for microphones dialog.
 

expertno.1

Technomancer
it can be "1 mic boost" or "2 mic boost" try to use both and see as in my case its mic 2 boost

also lower down the valuse of input of mic

also try it on other system

also contact the vednor if it doesn't solves the problem
 
Status
Not open for further replies.
Top Bottom