Heavy Photo - video editing and graphic design PC build - 1.45 lakhs

OP
P

Pradeepcool

Broken In
Photos of the build :)

IMG_20190524_095251 (1).jpg
IMG-20190614-WA0003 (1).jpg
IMG-20190614-WA0004 (1).jpg
 

whitestar_999

Super Moderator
Staff member
If possible try to exchange MB520 with MB511 as it has full mash front panel which will definitely help more in cooling compared to side vents in MB520 & when you are using a 9900k setup then any additional bit of cooling is helpful.

edit: I see you already finished the setup so ignore the above,just keep an eye on temps.
 
OP
P

Pradeepcool

Broken In
If possible try to exchange MB520 with MB511 as it has full mash front panel which will definitely help more in cooling compared to side vents in MB520 & when you are using a 9900k setup then any additional bit of cooling is helpful.

edit: I see you already finished the setup so ignore the above,just keep an eye on temps.

Sure thing ..will monitor the temps ..
 
OP
P

Pradeepcool

Broken In
^^Its good,a bit inferior to TXM series though.

Great..Thanks @whitestar_999 ..but strangely the PSU that I have purchased seems to cost more than the TXM variant .
Wonder why it is so ?Because the TXM is very old model ?

Corsair 750 TXM --
CORSAIR TX-M SERIES TX750M — 750 WATT 80 PLUS GOLD CERTIFIED PSU



Corsair Vengeance 750M Silver -
CORSAIR VENGEANCE SERIES 750M - 750 WATT 80 PLUS SILVER CERTIFIED PSU

Thanks
 

whitestar_999

Super Moderator
Staff member
Yeah,TXM being an older model is priced lower currently than vengeance series but even then TXM series is better.Above it you have to get RXm series.
 
Top Bottom