Display problem with linux

Status
Not open for further replies.
S

Suhas

Broken In
I recently installed fedora 7 given from DIGIT July 07.I have an AMD 3800+,1GB RAM,NVIDIA GeForce 6100 nForce 430 with Samsung syncmaster 740N TFT/LCD.There was no problem with the installation but after the reboot which is right after installation when I tried to boot into fedora it showed some errors and screen went completely white and the PC hung.I tried to log into single user mode and gave the command system-config-display, and saw the settings --- it recognised the syncmaster.I gave 800x600 and tried to reboot again ,this time the screen got garbled and hung.

I think the problem is no support for video driver.I tried the Ubuntu LiveCD - which also had a similar problem.

Is there no solution ? I do have internet, but I cant connect to the net in single user mode
 
abhi_10_20

abhi_10_20

Cool and Calm
not sure, but cud it b a problem with swap space allocated?....
how much space did u allocate for swap?

similar problem happnd wit me earlier with Fedora 3......
now i hav fedora 7 with 500MB swap....everything's well.......
 
infra_red_dude

infra_red_dude

Wire muncher!
check if ur nvidia 6100 chipset requires some restricted drivers to be installed. other than this one more cause can be selecting wrong resolution and refresh rate.
 
praka123

praka123

left this forum longback
@OP:browse only as local user,NOT root.2ndly,U need to user "nv" driver or proprietory "nvidia" driver for getting Display.if fedora doesnot bundles both these drivers,u can edit /etc/X11/xorg.conf device section driver as "vesa".also afaik fedora got a display config utility called "system-config-display" which may work in TUI also.keep posting here.
 
gary4gar

gary4gar

GaurishSharma.com
The Unknown said:
Swap need not be more than 3 times the computers RAM. i.e. if RAM=384 mb, then SWAP= 768 Mb
Click to expand...
Not necessary, i gave one 1 gb ram no swap, and there isn't any problem
 
praka123

praka123

left this forum longback
swap of 500MB is more than enough,dont go by those rules made for 2.4 series kernels and old.
 
nileshgr

nileshgr

Wise Old Owl
gary4gar said:
Not necessary, i gave one 1 gb ram no swap, and there isn't any problem
Click to expand...
Swap is not recommended for high ram pcs. I find my swap usage to be 0% always!!!! I have 384 Mb RAM, i have allocated 768 Mb for Swap.
 
praka123

praka123

left this forum longback
@OP and all fedora users.use below guide.it is highly recommended.it explains @Original Post's Nvidia driver(Display) problem too.best of Lux
*www.fedorafaq.org/
*www.fedorafaq.org/#nvidia
Also GIYF :) ,
*www.patheticcockroach.com/mpam4/index.php?p=36
*www.google.co.in/search?q=fedora nvidia install&btnG=Google+Search&meta=
 
OP
S

Suhas

Broken In
I found a solution...installed it on a virtual machine using VirtualBox.It is working fine and I can share with the host OS also very easily.Since I have enough RAM, it isn't even a bit slow.

Anyways, Thank you all for your suggestions.
 
Status
Not open for further replies.
Top Bottom