My 2nd question is that earlier I had a 1333mghz dual channel ram
Which I upgraded to a gskill 1600mghz dual channel. Earlier the windows Experience index ranked the 1333mghz at 5.9 which is
Understandable but after upgrading to 1600 it still ranks 5.9 why?
Is there a solution to this.
My 2nd question is that earlier I had a 1333mghz dual channel ram
Which I upgraded to a gskill 1600mghz dual channel. Earlier the windows Experience index ranked the 1333mghz at 5.9 which is
Understandable but after upgrading to 1600 it still ranks 5.9 why?
Is there a solution to this.
that is because WEI overall shows the lowest subscore by individual components.. It means that most likely your hard drive is the limiting factor as it has the lowest score 5.9
My 2nd question is that earlier I had a 1333mghz dual channel ram
Which I upgraded to a gskill 1600mghz dual channel. Earlier the windows Experience index ranked the 1333mghz at 5.9 which is
Understandable but after upgrading to 1600 it still ranks 5.9 why?
Is there a solution to this.
Are you sure your motherboard supports 1600 mhz RAM? Even if it does, some MB might need to enable it in the BIOS in the "Memory" Section..
Also post a screenshot of your WEI if you can
Aint Double Data Rate makes it 1600?
And to get the ratio to 4:4 or 1:1 you have to play with the FSB multiplier or over or underclock the CPU .
- - - Updated - - -
Please mention your gear? I hope I havnt missed it!
Right, the reason why it is showing 5.9 is because you are using onboard IGP.. The onboard IGP takes some amount of RAM to use as Graphics Memory, thats why the system cannot fully utilize the amount of RAM you currently have..
Upgrade to a dedicated GPU and you will find your score jump to a 7.1+ rating
Here's mine, I have a dedicated GPU
*dl.dropboxusercontent.com/u/72261408/dedicated.png
No, try a dedicated GPU first.. im sure it will solve the problem
If you have an AUTO option in BIOS, use it instead
TBH, I dont have any idea about the MOBO you currently have, best not mess with it unless you know what you are doing
You need to increase the FSB to get 1:1 and yes it will increase temps.