Re: Abnormal CPU/Chipset Error No Booting & No POST
I actually found that the PSU was at fault and replaced it with a spare hcl 240w PSU...itws working fine now
check here-*www.thinkdigit.com/forum/hardware-q/180302-changing-parts-form-2-pcs-troubleshooting-urgent.html#post2050386
I finally found which part of my computer is faulty:
Its NOT the Biostar motherboard but the main culprit of this problem is "AMD Athlon ii x4 630 Processor"
On 18th December 2013 I Turned off my computer normally
(at around 9:00 P.M. Indian Standard Time) and when I switched on my P.C. on the same day at around 11:00 P.M. I'm Not Getting P.O.S.T. (Power On Self Test) (No Beep No Post) the cpu fan spins,
the system fan spins,the motherboard power up,Processor gets Hot but No POST.
At 1st I thought its a small problem so I Cleared the CMOS but still the problem remained.
That time I thought my Biostar TA785G3 HD Ver. 5.x Motherboard is having some problem and that is why I'm not able to "boot" or able to enter "BIOS setup" but after trying my level best I finally know that my Amd Athlon ii x4 630 Processor is faulty.
#################
I've bought this Amd Athlon ii x4 630 Processor from:
"Vedant Computers Sales Pvt Ltd"
(033) 22129832
26, Near Chandni Crossing, Ganesh Chandra Avenue, Dharmatala, Kolkata 700013
#################
I've bought this Amd Athlon ii x4 630 Processor On: 7th June 2010.
I've Never Overclocked my Amd Athlon ii x4 630 Processor.
It was running in STOCK-Speed from the begining till 18th December 2013.
if my processor is out of warranty then what should I do ?
Let me tell you,how I found that My AMD Athlon ii x4 630 Processor is faulty.
I've already checked my Corsair CX 400W PSU (Power Supply Unit) with a technician who checked all the voltages of the PSU and its working Fine.
On 21st January 2014 I travelled to Ranchi from my city Jamshedpur I took my Motherboard,Processor and Ram to one computer shop who sells AMD stuffs (The Computer Shop Person Installed my CPU in a brand new "Gigabyte GA-78LMT-USB3 Motherboard" and its showing the same result that is, its not Booting Beeping Or POSTING,
Then the shopkeeper opened his Brand new pack of one AMD Sempron processor and he intalled in in the New Gigabyte GA-78LMT-USB3 Motherboard,it POSTED right up and Then I told him to put the New Sempron Processor in my Biostar TA785G3 HD Ver. 5.x motherboard and my board also POSTED and Beeped so the end result is that my Amd Athlon ii x4 630 Processor is faulty.
My AMD Computer Configuration Which I was running:
CPU: AMD Athlon II X4 630
MotherBoard: Biostar TA785G3 HD Ver. 5.x
Power Supply Unit: Corsair CX 400W
RAM/Memory: 2GB X 1 Stick DDR3 1333Mhz Corsair
HDD: Western Digital Green Hard Disk.