Is this config okay ?

Status
Not open for further replies.
M

mehra.rakesh

Journeyman
Hey guys , i have bought the following
E8400 -- 8450
2GB RAM 800Mhz Transcend--1950
400 GB HDD Seagate--3150
Liteon 20X DVD RW drive--2150
Iball Cabinet stock 400W SMPS --1200

For the mobo i wud be buying a Asus P5GC MX 1333fsb with a HD 3450 for 2450 & 2050 respectively . Is the config okay cause i need to go low with the Mobo.
 
Ecko

Ecko

Wandering In Tecno Land
Increase ur ram & power supply

If you want something better at a nice price tehn Opt for AMD else Intel is excellent
 
Last edited:
OP
M

mehra.rakesh

Journeyman
Dude the ram's at 800Mhz 2GB .stock 400 w should suffice. Nothing beats a combo of Intel Proccy & AMD graphx . AMD ????? wake up dude. Its 2008 not 2005
 
Psychosocial

Psychosocial

Violent serenity.
I don't think HD3850 is a good buy. Better get a Mercury 8600GT 256MB GDDR3 or the best option would be a 9600GT :).

I don't think 400W would suffice, get atleast a Cooler Master eXtreme Power 500W.

Just some suggestions :).
 
OP
M

mehra.rakesh

Journeyman
^^ Are you sure that anything from Mercury is worth it . May be the things have changed at Mercury but they used to be worst than the cheap chinese non branded imports.

Well , i wont be using SLI or anything as such . If the stock gfx is good enough for my requirements then no gfx card . Though i seriously doubt that . Hence the 'HD 3450' .
But i cant make out why the extra 100 W power for
 
A

acewin

Point Blanc
@Kpower, rakesh is right he really would not lead to change his PSU the stock iBall PSU will suffice his reqs. he is not opting for high power GPUs

@rakesh yesh Mercury or MSI GPU Kpower suggested is worth the price otherwise u can go for Palit/POV/XFX also, and he is refereing to 256MB DDR3 model of 8600GT.

Think again of the mobo, I think you have not checked the specs of the mobo properly, u r buying 800 MHz FSB RAM for a 533 FSB mobo,
n why r u going for older chipset mobo when u can easily get better chipset mobos in less than 3K
 
desiibond

desiibond

Bond, Desi Bond!
1) Get MIS/Palit/eVGA 8600GT. Don't get XFX as it is runs very hot and never ever trust Mercury.
2) ASUS P5GC-MX is not 1333MHz FSB board. It's an 800MHz FSB board. Stay away from it if you want E8400.

as it looks like you are on a budget, My config would be

1)Phenom X3 8450 for 5.5k
2) Gigabyte 780G mobo for 4.5k
3) 2Gb ddr2 800 ram for 1.8k
4) 400 GB HDD Seagate--3150
5) Liteon 20X DVD RW drive--2150
6) Iball Cabinet stock 400W SMPS --1200
7) HD 3850 for 8k or HD4850 for 10k
This config will run most of the games at low settting and run Vista without any hiccup, thanks to the Dx10 onboard GPU.

For Intel:

1) E8400
2) Abit IP35-E
3) nVidia 9500GT

8600 or HD3450 have become old and they will not be useful for long. Get 9500GT or HD4850 or HD3850.
 
maverick786us

maverick786us

Padawan
mehra.rakesh said:
Hey guys , i have bought the following
E8400 -- 8450
2GB RAM 800Mhz Transcend--1950
400 GB HDD Seagate--3150
Liteon 20X DVD RW drive--2150
Iball Cabinet stock 400W SMPS --1200

For the mobo i wud be buying a Asus P5GC MX 1333fsb with a HD 3450 for 2450 & 2050 respectively . Is the config okay cause i need to go low with the Mobo.
Click to expand...


Instead of seagate go for [FONT=&quot]Western Digital[/FONT][FONT=&quot] WD6400AAKS (640 GB)[/FONT]

Its best bang for bucks.

Instead of Transcend go for either G-Skill, Corsair, OCZ or team
 
OP
M

mehra.rakesh

Journeyman
FOR EVERYONE I HAVE BOUGHT ALL OF THE THINGS EXCEPT FOR MOBO & GFX CARD . ALSO I AM ON A SHOESTRING BUDGET FOR MOBO & GFX.... ***MAX 5000 OR LESS*** FOR BOTH .

Yeah i know 5000 is very less but due to my other purchases (mobile, Asus EEEPc etc)i am left with very little cash. Also i wud be upgrading mobo & gfx around 14 months from now. Getting XFX 630i is a good option but its not available here .
Thanks for the suggestions guys.
 
maverick786us

maverick786us

Padawan
mehra.rakesh said:
FOR EVERYONE I HAVE BOUGHT ALL OF THE THINGS EXCEPT FOR MOBO & GFX CARD . ALSO I AM ON A SHOESTRING BUDGET FOR MOBO & GFX.... ***MAX 5000 OR LESS*** FOR BOTH .

Yeah i know 5000 is very less but due to my other purchases (mobile, Asus EEEPc etc)i am left with very little cash. Also i wud be upgrading mobo & gfx around 14 months from now. Getting XFX 630i is a good option but its not available here .
Thanks for the suggestions guys.
Click to expand...

Some other motherboard recommendations:
Gigabyte GA-EP43-DS3L Intel P43 Motherboard
MSI P45 Neo3-FR Intel P45 Motherboard
Gigabyte GA-EP45-DS3R Intel P45 Motherboard
Asus P5Q Pro Intel P45 Motherboard
DFI Lanparty DK X38-T2R Intel X38 Motherboard
Asus P5E Deluxe Intel X48 Motherboard
Gigabyte GA-X48-DS4 Intel X48 Motherboard

Just to help you out: All of these motherboards have PCI-E 2.0 which may be useful for future GPU upgrades. If you don't need RAID, more than 6 SATA ports and only need semi-decent overclocking, check out the DS3L. If you need 8 SATA ports, RAID, 4 PCI slots, and legacy ports, then get the Neo3-Fr. If you don't need more than 6 SATA ports but want RAID, firewire, a second PCI-E x16 port, a second gigabit port, support for 16GB of RAM, optional eSATA, x8/x8 Crossfire, and high overclocks, then get the DS3R. If you like the DS3R but need 8 SATA ports, want an onboard pre-installed fast booting Linux setup, only need support for 8GB of RAM and don't need a second gigabit port, get the Asus P5Q Pro. If you want Crossfire with full x16/x16 bandwidth, get the Lanparty DK X38. Do note that the Asus website can be slow sometimes.
 
OP
M

mehra.rakesh

Journeyman
^^^^ Any of the motherboards that u've mentioned don't come within 5000 bucks . Even at newegg all are more then 100$ .

I can't extend my budget by even 100 bucks. Just to repeat I need no RAID , no crossfire , no overclock , no nothing . I just need a barebones MicroATX ( as it wud be cheaper than a ATX) . And a barebones graphics card that can play games upto the year 2006 max. and both of them within 5000 any other things in that price wud be a Luxury .

Just so that you know I wud be upgrading to MSI 45 Neo 14-20 months from now .
 
OP
M

mehra.rakesh

Journeyman
^^ A very good board but no dual channel support . Has a very good IGP for its price though . Also Is 8400GS 256 MB DDR2 better than the recently launched HD 3450 256 MB DDR2.

Thanks for the help guys .Appreciate it .
What about my original suggestion of P5GC MX 1333 . Here's the specs for it *in.asus.com/products.aspx?l1=3&l2=11&l3=498&l4=0&model=1768&modelmenu=1 .
 
A

acewin

Point Blanc
@rakesh the mobo you are considering is not a proper for your proccy and RAM, until and unless you OC it.
neither is ASUS P5N-MX suitable for the proccy and RAM

I suggest you consider good onboard graphics mobo based on nVidia 630i chipset like from XFX 630 (price 3.5K), Palit N73PV Motherboard(less than 3K), they would be enough for old playing games, saves your money also, so that if you really wanna go for any GPU u can get one whichever you think is good.

7150 onboard GPU is much better than intel x3100 onboard GPU.
In 8400 and 3450, I would say 3450 is better choice.
 
Status
Not open for further replies.
Top Bottom