Dual Monitor 32" - Arm/Mount/Clamp

venkig

Broken In
The two monitors I am using are - BENQ EW3270W and LG 32MN58H(P).

I am looking to declutter my desk and adjust my monitor(s) for smooth vertical/horizontal movement. Only the LG one will be adjusted to vertical or horizontal frequently and the BENQ won't be put in vertical position.

My LG monitor mount looks very weird and doesn't appear to be a standard VESA mount. Do you think I should do individual arms or a dual monitor one?

LG Mount looks like below

1595812947020.png


BENQ Mount

1595812984200.png


My desk looks like below - 6 feet by 6 feet

1595812394210.png


Mods - If this post doesn't fit in this sub forum, please free to move it to the appropriate place
 

Nerevarine

Incarnate
Never seen a monitor with holes that apart. It might not be a vesa mount. The second picture seems like a standard vesa mount. Please check documentation
 

vito scalleta

In the zone
I see that the mounting says 200x100 mm in Lg's website for the model.
Maybe he needs an adapter like below so that monitor can be mounted on the adapter and the adapter will be mounted on the vesa mount.
*www.amazon.in/Universal-Adapter-Medium-Mounts-Bracket/dp/B00U3DQO6I
 
OP
V

venkig

Broken In
I see that the mounting says 200x100 mm in Lg's website for the model.
Maybe he needs an adapter like below so that monitor can be mounted on the adapter and the adapter will be mounted on the vesa mount.
*www.amazon.in/Universal-Adapter-Medium-Mounts-Bracket/dp/B00U3DQO6I

Interesting. I'll keep this in mind for the Adapter. I'll show the final picture once the dual mount is installed.
 
Top Bottom