Many product manufacturer don't list all software in website. Moreover it is not possible to publish software for all the models built ever. You must understand that, if you get a software CD bundled with an appliance, it does not mean, the manufacturer has a website and if at all there is a...
@ Hrishi
Thank you a lot.
Now I am able to create both the Vlans and add ip adress to both vlans, 192.168.1.5 to vlan1 and 192.168.10.50 to vlan2.
Then I add specific interfaces to both vlans ; GE 0/1/1 to vlan1 and GE 0/1/5 to vlan2
DSL ISP router (192.168.1.1) is connected to vlan1,(physical...
I have Numeric Digital 600 AX UPS which has a serial port which i connected to PC.
But I am not able to get UPS monitoring software for my UPS, and Numeric does not list it anywhere.
Pls help me to get the software.
@whitestar_999
Thank you for the reply. Your question is justified. The answer is ours is a Govt Organisation, and policy makers don't need valid/economical reason to decide what is appropriate at which configuration. According to a security guideline we have to put a management L2 switch...
L2 Switch model: Cisco C 3750X T-S
it is placed between ISP (BSNL ADSL router) and my local LAN.
IP of bsnl adsl router: 192.168.1.1
IP range of my local lan is 192.168.10.X
I want to configure two VLANs in this router (& add specific ports to each VLAN) and add static routes so that all my...
That is not exactly under a Menu named "MAC Filtering".
If yes, post the full-screen shot so that one can figure out.
Further the interface doesn't prove that in "Activated" mode all the MACs mentioned are permitted only. Those can be set to 'Deny Association' mode also while the main menu is...
(1) You don't know the field requirement of the situation. The ADSL router is physically protected and only ethernet cables are layed to the other building and meant to be used by one/or two specific machine only.
(2)There is not a single ADSL router in which "allowed (in MAC Filtering Menu)...
(1) First remember that in allowed (permitted) mode all MAC layer frames will be FORWARDED except those matching with any of the specified rules in the following table..
..AND I CAN'T GUESS THE MACs of INTRUDER.. to fill in the table.
(2) My ADSL router model is TPLink TD-8810 which is a non...
@asingh : I have set MAC Filtering to Blocked mode. ( means that all MAC layer frames will be BLOCKED except those matching with any of the specified rules in the following table). I have added only one PC's MAC; still anyone can connect his laptop and is able to surf. How ?
(ii) if I am adding...
I have a 4 port ADSL router ( TPLink-TD8841 ) used for Internet access. The modem is configured in PPP-O-E mode (userid & pw is set in the modem itself).
I want that except two laptops(mine), no other laptop or desktop should able to access internet from the router.
For which i want to deny...
@arpanmukherjee1 : I know teamviewer and other remote control software.
Mine purpose is to :- not to go physically or ask somebody to do some type of enable at the remote PC. Just i want to have the access on that default installed machine from my end without doing anything on that end.
All...
@Rajesh345 : This is not the reply to my question . If you don't know the answer pls don't divert towards other things.
I need to achieve this remotely because this is required often in some situations where we don't have physical access to all systems.
I have WinXPSP3. My friend has also WinXPSP3.Both are on the same network switch.I know my frined's admin pw and ip address.Both PCs are not part of any domain.
my frined's file and printer sharing is off and windows firewall is ON. I can't get ping reply from him. I think i can get ping...
By VGA Out : I mean I can connect to any CRT/LCD Monitor without switching on PC.
By USB interface : I mean the same external tV tuner should have a optional USB interface which may stream video to PC for recording whenever required.
Hi Guest we just wanted to alert you to a major change in the forum. We will no longer be allowing the posting of outgoing links. Please use the attachment feature to attach media to your posts.