BACKGROUND OF THE BACKGROUND DOES NOT CONNECT THE POWER BY THE BOARD
In the process of using it, it is possible for you to fall, bump or get wet ... these are the main causes of the motherboard battery death. Can not operate although the battery core can still be used. In this case, only technicians and circuit boards can handle the problem. It is best to contact the store you purchased for guidance and warranty support if available.
But out of all the errors, the most common errors occur most frequently !.
NON-POWERED BACKUP INPUT MICROUSB.
Your MicroUSB input port is faulty and can not operate as the main cause of up to 90% of the cases of non-rechargeable battery chargers. The problem is caused by the process of using, the user acts on the charging port when charging and unplugging. Makes the legs of the charging port shake, G ... Make the contact surface between the legs and the charger core does not match and lead to charging phenomenon into the electricity.
Most of these errors are due to user so shop does not support the warranty. However, there is a suggestion for you to find a way to permanently reconnect the MicroUSB input charger port. For example you can use the glue to the elephant to paste and fix. In the process of using you should limit the extra force on the charging port offline.
In the process of using it, it is possible for you to fall, bump or get wet ... these are the main causes of the motherboard battery death. Can not operate although the battery core can still be used. In this case, only technicians and circuit boards can handle the problem. It is best to contact the store you purchased for guidance and warranty support if available.
But out of all the errors, the most common errors occur most frequently !.
NON-POWERED BACKUP INPUT MICROUSB.
Your MicroUSB input port is faulty and can not operate as the main cause of up to 90% of the cases of non-rechargeable battery chargers. The problem is caused by the process of using, the user acts on the charging port when charging and unplugging. Makes the legs of the charging port shake, G ... Make the contact surface between the legs and the charger core does not match and lead to charging phenomenon into the electricity.
Most of these errors are due to user so shop does not support the warranty. However, there is a suggestion for you to find a way to permanently reconnect the MicroUSB input charger port. For example you can use the glue to the elephant to paste and fix. In the process of using you should limit the extra force on the charging port offline.