Search results

Thanks for your reply... Well to say, I solved the problem myself... It was due to the interference from the graphics card... Now line tone is clear and connects at full speed... I unplugged the card from the first slot and installed it in the second... It works as fine as before.. And abt using...

I know about getting into the Bios and all cos I do overclocking there and configure hardware settings within... Its no problem,... but interchanging boards frequently is a boring task,... Ya I agree with you that all mobo's have their own problems.. This will have its own for sure... And...

Thanks for your replies... I can't figure out my BIOS version now as I will have to unplug the old board again and plug the new board in and do the same back to connect to internet... My CPu is P4 H.T 3.0GHz 800FSB processor with sspec no 530J ..... And Djn have you had any probs like this and...

Hi Everyone, I recently upgraded from my Intel 915GVWB mobo to an Asus P5GC-MX board... My processor is the same P4 H.T. 3.0 Ghz 800FSB one which I used in the 915 board... My upgradation was fine and board runs perfectly without overheating or hanging or any other problems... I also...

Well, your cabinet seems to be the older AC 97' compatibe one and your motherboard's havin the new Intel High Definition Audio.. These are incompatible.. So if you are intending to do a little modification, you can make this work out... I'll give you the conections.. The Things on the left...

Is that you changed your mouse from right hand to left hand use in the OS? That makes it do so... Or maybe messed with the mouse or softwares like cursor xp to change the mouse offset position too far to make it appear on the left...

Free ports is not a problem for me cos I have 8.. Just want to know if USB has any distinct advantage over PS2.. so a say it takes time to recogonize usb mice after a boot.. Then if you check that x16 card you can notice that there is a cutting at the left edge approximately the size of an x1...

Hello everyone, I'm having an Intel 915GVWB motherboard and a p4 H.T. Processor with 512mB ram.. Im planning to put a Graphics card on board... My board has a PCI x1 slot .. So i would like to know whether an x16 card like Nvidea 7200 will fit into it.. I hope it will do and the...

Easy way... get an IR extender... If u hv experience in electronics, google for its circuit... I hv come across a lot of them...