Processor for Intel 915GLVG

[hsnayvid]

hi guys,
m looking for a cheap solution so which processor would you suggest to go along with the motherboard...


i have celeron d 365 (3.6Ghz) in mind...
or plain Pentium Processor with HT...
suggest me the best solution...

 

[Ankur Gupta]

Wrong Section...
Mods please move this to Hardware Troubleshooting...
Thread Reported...

 

[naveen_reloaded]

reeeeeeeeeeeported...

 

[RCuber]

Here is the list of processors supported.
*support.intel.com/support/motherboards/desktop/d915glvg/sb/CS-026956.htm

 

[hsnayvid]

oops... posted it here...
@ charan
i've seen the list and Celeron D 365 is not listed there... but the list was last updated Sept 2006 and this one was released in Jan 2007
but according to this page:
*www.intel.com/products/processor/celeron_D/index.htm
it is supported by all 915G/GL series...
m so confused!!!

mods.. please move the topic...

 

[RCuber]

why dont you go for P4 Instead of Celeron? Budget problem?

 

[hsnayvid]

yups!
dont want to spend anything if possible...
coz i need to use this pc for around an yr! maybe even less...
wont 3.6 Cel be better than 3.0HT or a similar processor!!

 

[RCuber]

lol you want a processor for the mobo , I want a mobo for my processor

 

[hsnayvid]

so what do u suggest???
CEL D 3.6Ghz is Rs.1600-1700
P IV 3.0 HT is Rs.3100-3200

i'll get some more rates before finally deciding on the one to purchase...
i would also have preferred PIV over cel but budget doesn't allow me for the time being!

 

[Choto Cheeta]

@hsnayvid

either opt for a 6x1 range P4 as the new 6x1, for ex 631 / 641 P4 range are based on 64nm

I would vote for Intel Pentium 631 which is 65nm, 3.0 GHz, 2 MB L2 and 800 MHz FSB

 

[naveen_reloaded]

Where are the mods

Why is this thread here ?

 

[hsnayvid]

i would also like to go for PIV 3.0HT
but m not willing to shell out so much...

will there be a lot of difference b/w 3.0HT and 3.6 Cel??

 

[praka123]

lol you want a processor for the mobo , I want a mobo for my processor

offtopic:
I have a ASUS-P5VDC-MX VIA chipset resting here in my shelf for past few months.if u use windows it works perfect.in linux too it works but only 2D support PM me if ur interested.

 

[Choto Cheeta]

i would also like to go for PIV 3.0HT
but m not willing to shell out so much...

will there be a lot of difference b/w 3.0HT and 3.6 Cel??

There is b a lot of Differnce in terms of just the processor... New P4 6x1 would come with 65nm and 2 MB L2 and 800 FSB where as the Cel D would be just 533 FSB and 512 KB L2

P4 6x1 are much better and power full processors than Celeron D

 

[RCuber]

offtopic:
I have a ASUS-P5VDC-MX VIA chipset resting here in my shelf for past few months.if u use windows it works perfect.in linux too it works but only 2D support PM me if ur interested.

I still have warranty on that mobo so I will be getting a replacement mobo soon, so your mother board is not for me , Thanks for the offer Prakash

 

[hsnayvid]

i get that ChotoCheeta
but then i have another pc with PIV 3.2HT...
i need this one for using the net and a pit of programming.. if i'll begin to try that..

i've been using PIII 450MHz... it would be a significant improvement on that surely... and in around an year the pc would be of no use...

wat about Pentium 2.6D or 2.8D.. They are cheaper,i've heard...

if not celeron then P2.6D/P2.8D or 3.0HT??

 

[Choto Cheeta]

Pentium D cheaper ?? Pentium D means Dual Core processors and as far as I know they are costlier than 6x1 processors !!!

Pentium 4 HT (the 5xx/6xx)
Pentium D (The 8xx/9xx range)
Pentium EE (840 / 965 /955)

 

[axxo]

thread still on???

 

[azzu]

it hasnt removed UP TO NOW !

 

[hsnayvid]

yup... 2.6D is cheaper than 3.0HT!!!!!!!
but i just checked and 915 doesn't support the Pentium D series..........
finally will see what fits in the budget... thanks for all ur help!!

6x1 series is also not supported.......