p2p not able to download.

Status
Not open for further replies.
User Name

User Name

In the zone
I can not able to d/l files using p2p clients.(utorent/flashget
it show some peers returned and connecting to peers but never conects :(
this prob. was never before.
i use bsnl bb.
what is the prob. any other way to d/l.
 
thewisecrab

thewisecrab

AFK
What files are you trying to download? :rolleyes:
If there are seeds, then you'll get better connections than peers as the latter can go offline at any time and screw up the download
 
debsuvra

debsuvra

is NOT a PC/Mac
User Name said:
I can not able to d/l files using p2p clients.(utorent/flashget
it show some peers returned and connecting to peers but never conects :(
this prob. was never before.
i use bsnl bb.
what is the prob. any other way to d/l.
Click to expand...

Check the numbers of Seeders and Peers for the torrent you are trying to download. If the torrent does only have a very small numbers of seeders then it is a largely probable that the torrent may not connect at all.
 
OP
User Name

User Name

In the zone
I always check seeds before D/L any torrent.
it shows many seeds but connects to very few or nothing.

Status Available Peers: 232 Connected Peers: 1 Connected Seeds: 0 Connecting Peers: 17 Health: 94%

what should i do for d/l file.
 
C

Cool Joe

The Black Waltz
Your seeds and peers may not be using the tracker(s) which you're using. Always search for the torrent which you're downloading on www.torrentz.com. It lists many trackers which are not included in the torrent file. Also, separate each tracker with a blank line in uTorrent.
 
OP
User Name

User Name

In the zone
Have you forwarded the port which you are using in µtorrent?
Click to expand...
I don't know.

Does it also depends on timing? In night 2 to 8 am i got few connections but in day it is more.
 
C

Cool Joe

The Black Waltz
Even without forwarding any port, you can get connected to seeds and peers. The speed'll be a bit less that's all. Follow my instructions and try.
 
OP
User Name

User Name

In the zone
I need Port forwarding.

I use D-link GLB-502T modem Software Version: 3.7.0D.1
Whenever i cilck on port forwarding it says
you must enter IP adderss on LAN clients page for selected lan group to enter this setup.

So go to lan clients and fill all things.
like
Lan selection:Lan group 1
IP address:192.168.1.2 (which my pc static address)
host name :(here wrote my pc name)
MAC address: (I wrote physical address )
then click on apply.
then i again cilck on port forwarding but again shows same msg. :(

what is going wrong.

Help me
 
ashu888ashu888

ashu888ashu888

Core i7 (nehalem) Owner
MAC address (Media Access Control) address is a six-pair set of hexadecimal numbers, for example, a1-c2-e3-44-5f-6d.

read this :)

*kb.iu.edu/data/alfq.html
 
OP
User Name

User Name

In the zone
After reading on port forwading web site. I done it in my router.

Protocol(Tcp) Port Start Port End port map(all given same from utorrent port to be open) and also given name.

after that i started utorrent & i checked for port open and it was open.

But utorrent still shows exclamation mark.And when i checked for port forward test it gives error msg.

What is going wrong :(

Is Protocol(Tcp) right?
 
Status
Not open for further replies.
Top Bottom