demoninside
In the zone
hey buddies can any one tell me how to overclock my XFX4 MX 4000
128mb 8X AGP.
128mb 8X AGP.
- Status
blade_runner
Cyborg Agent
ice said:
LOL! ice u sound like those damn manufacturers who warn you against overclocking. But yeah overclocking is a bit risky if done improperly. But if do it the correct way it yields good results.
Instead of using hardpage, try coolbits registry files. *downloads.guru3d.com/download.php?det=815. This way there's no hassles of compatible drivers. Hardpage etc. usually works with certain driver versions and anytime a new driver is available, u have to wait for an updated Hardpage. I dunno if its still like that, but a year back, it was so.
G
gxsaurav
Guest
DO NOT OVERCLOCK IF YOUR GPU COMES WITH A HEATSINK ONLY & NO FAN
OP
demoninside
In the zone
ya i do not have a fan on it but i have placed one extra for it
blade_runner
Cyborg Agent
My GPU doesnt have active cooling only a HS, but nevertheless i have overclocked it succesfully.
Extra cooling is only needed if u r into major occing or ur amb temp is quite high. Btw, Blade, a fan will go a long way in extending the life of ur card even if its working fine without one. And if u're occing majorly, u might try heatsinks for the ram on ur card. Check out *www.tech-arena.com/articles.php?action=show&showarticle=11.
See, lower operating temps=longer life+more stability.
See, lower operating temps=longer life+more stability.
blade_runner
Cyborg Agent
Hehe !! I am gonna trash this card in some time anyways.......so me not bothered. Right now i am running it @ 285/410.
dOm1naTOr
Wise Old Owl
Overclocking can be done dirictly through the graphics driver itself.
Please follow these steps carefully.
start/run nd type regedit nd press enter
Now the registry editor pops up.Here navigate to:
HKEY_LocalMachine/Softwares/Nvidia/Global/NVTweaks.
Here right click on the empty space on right side new/DWORD value
Name it CoolBits nd give the value 3
Close the registry editor nd restart.
Now after restart Rigthclick on blank space on desktop/properties/advanced/Gforce tab.
Here a new column appears called clock frequencies.Here U can adjust the core nd memory clocks.
Do this by an increment of bout 10 mhz each time nd do some gaming after each increment till it starts showing atrifacts.Then reduce the speed bout 5 to 6 mhz.
Done this is the sweet point of Ur card.
Please follow these steps carefully.
start/run nd type regedit nd press enter
Now the registry editor pops up.Here navigate to:
HKEY_LocalMachine/Softwares/Nvidia/Global/NVTweaks.
Here right click on the empty space on right side new/DWORD value
Name it CoolBits nd give the value 3
Close the registry editor nd restart.
Now after restart Rigthclick on blank space on desktop/properties/advanced/Gforce tab.
Here a new column appears called clock frequencies.Here U can adjust the core nd memory clocks.
Do this by an increment of bout 10 mhz each time nd do some gaming after each increment till it starts showing atrifacts.Then reduce the speed bout 5 to 6 mhz.
Done this is the sweet point of Ur card.
rachitboom2
Ambassador of Buzz
Where (I mean which site) did you get this tweek (Its preety coolaravind_n20 said:
) !!!
rachitboom2
Ambassador of Buzz
Hey dude who are you talking about ???icecoolz said:
I who is "pickin out old threads" again !!! :roll:
hes talking abt aravind_n20
see the post dates man ... he revived the thread not u
anyways arvind is warned and removed from warning on a mods suggestion
however the warning still stands and i hope u doesnt repeat this !
ppl plz stop reviving old threads without purpose and members dont encourage them !
see the post dates man ... he revived the thread not u
anyways arvind is warned and removed from warning on a mods suggestion
however the warning still stands and i hope u doesnt repeat this !
ppl plz stop reviving old threads without purpose and members dont encourage them !
rachitboom2
Ambassador of Buzz
OK thanks !!!theraven said:hes talking abt aravind_n20
see the post dates man ... he revived the thread not u
anyways arvind is warned and removed from warning on a mods suggestion
however the warning still stands and i hope u doesnt repeat this !
ppl plz stop reviving old threads without purpose and members dont encourage them !
- Status