My system Tempratures in ubuntu, are they normal??

[gary4gar]

gaurish@gaurish-desktop:~$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+38°C

w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.15 V (min = +0.70 V, max = +1.87 V)
+12V: +11.98 V (min = +2.37 V, max = +5.23 V) ALARM
+3.3V: +3.33 V (min = +1.25 V, max = +1.07 V) ALARM
+5V: +5.07 V (min = +3.44 V, max = +0.77 V) ALARM
-12V: -11.78 V (min = -3.40 V, max = -14.91 V) ALARM
V5SB: +5.03 V (min = +1.16 V, max = +4.68 V) ALARM
VBat: +3.58 V (min = +3.38 V, max = +1.02 V) ALARM
fan1: 0 RPM (min = 4655 RPM, div = 2) ALARM
CPU Fan: 5357 RPM (min = 675000 RPM, div = 2) ALARM
fan3: 0 RPM (min = 6553 RPM, div = 2) ALARM
M/B Temp: +45°C (high = +16°C, hyst = +0°C) sensor = thermistor ALARM
CPU Temp: +39.0°C (high = +60°C, hyst = +55°C) sensor = thermistor
temp3: +66.0°C (high = +60°C, hyst = +55°C) sensor = thermistor ALARM
vid: +0.000 V (VRM Version 2.4)
alarms:
beep_enable:
Sound alarm enabled

there is ALARM in many of the indicators, is this info it correct?

 

[eddie]

Your system is running at 38°C. Is that too much or too less for you? Why are you worried?

 

[gary4gar]

i am worried because seeing the word "ALARM " many times
and if any one point to a page where i can know what are these indicators like VCore,V5SB,VBat

 

[kalpik]

The alarms are set wrong

 

[Anindya]

Plz tell me what r the temp range for all the parts inside the cpu? Also do give a software link which is reliable for all these. Thanks.

 

[eddie]

i am worried because seeing the word "ALARM " many times

Your ranges are set wrong. You can configure them in sensors.conf file.

 

[gary4gar]

what will be the correct ranges???
a complete reference page is helpful

 

[QwertyManiac]

I don't know of correct ranges, I guess thats mostly hardware dependent as long as they're fans.

But look at this:
CPU Fan: 5357 RPM (min = 675000 RPM, div = 2) ALARM

That's a good example of your incorrect values.

 

[gary4gar]

I don't know of correct ranges, I guess thats mostly hardware dependent as long as they're fans.

But look at this:
CPU Fan: 5357 RPM (min = 675000 RPM, div = 2) ALARM

That's a good example of your incorrect values.

yup i think the default values are wrong itself, i need to change them
anybody has a idea what paramaters i should use?
config
amd athlon 64 3000+
msi-k8mm-v(via k8m800 chipset)

 

[praka123]

did u apt-get install sensors-applet or hardware-monitor? I think they offers adjust alarm level etc.