My Configuration Is.........!!! HelP

Status
Not open for further replies.
pirates1323

pirates1323

In the zone
Yes my config.. is intel 1.6~ Ghz, Mercury Motherboard KOB845NFSX, 128 SD ram, 32 mb SiS graphics card..

Now I want to upgrade my ram and graphics card to 512 ram and 64 or 128 graphics card. I want to ask u guys that will my pc support the new things.

Please tell :cry:
 
swatkat

swatkat

Technomancer
yeah..u can upgrade to 512mb ram....r u having SiS Graphics Card with u now?, u can put a newer card.....
 
OP
pirates1323

pirates1323

In the zone
swatkat said:
yeah..u can upgrade to 512mb ram....r u having SiS Graphics Card with u now?, u can put a newer card.....
Click to expand...

thanks, Yes i have.., but I am upgrading it in this summer. Also I want to know that with this new configuration can I able to play Half life 2 smoothly
 
D

daj123

Journeyman
I doubt the 845 based mobo will have an AGP slot or if it does it will have a 4x AGP slot. You need a 8X slot for an Ati radeon 9600/9800 PRO.
 
OP
pirates1323

pirates1323

In the zone
daj123 said:
I doubt the 845 based mobo will have an AGP slot or if it does it will have a 4x AGP slot. You need a 8X slot for an Ati radeon 9600/9800 PRO.
Click to expand...

Thanks I will ask my dady 8)

bye
 
I

icecoolz

Cyborg Agent
No u dont need a 8X slot. Even a 4X slot would do. The 8X card will just run at 4X and there isnt much of an improvement between 4x and 8X anyways.
 
OP
pirates1323

pirates1323

In the zone
Here's my mothereboard info:

Description
- Pentium 4 Mainboard with Intel 845 Chipset Design

Processors
- Socket 478 supports the
* Intel Pentium 4 processor (Northwood)


Chipset
- Intel 82845 & 82801BA--Memory Controller Hub (MCH), I/O Controller Hub 2 (ICH2) & Firmware Hub (FWH) with following features:
* Supports 4X AGP (AGP 2.0 Specification), 1.5V only
* Supports Ultra DMA100 (ATA100)
- LPC I/O: ITE 8712F
- AC97 Audio Codec
* Compliant with AC97 2.2 specification


System BIOS
- Award BIOS with Flash ROM in Firmware Hub (FWH)
- Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
- Full support for ACPI revision 1.0A specification

Memory
- Three 168-pin DIMM sockets for 3.3V SDRAM (PC133/PC100)
- Maximum: 3GB

I/O Interface
- Supports Plug and Play function
- PS/2 keyboard and PS/2 mouse connectors
- Dual USB Ports and LAN Connector
- One - EPP/ECP mode parallel port
- Two - 16550 high-speed serial I/O ports
- Audio Ports (Line-in, Line-out, Mic-in, CD-in and game port)
- Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
- Dual PCI IDE interfaces - support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA66/100)
- ATX12V Power Supply Connectors
- Ports, headers and others
* IrDA header
* Extra USB header
* Front Panel MIC/Line-Out header
* Chassis open detector header
* HDD LED, ACPI MSG LED, Reset Switch, Power Switch headers
* CPU, Case and Power Supply Fan headers
* LAN Card Wake Up/Internal Modem Ring Wake-Up headers


RTC & Battery
- Intel I/O Controller Hub 2 (ICH2) included 256 bytes CMOS SRAM
- With CMOS SRAM hardware clear jumper

Expansion Slots
- 6PCI slots, 1 AGP Slot, 1 CNR Slot

Form Factor & Layers
- ATX Size (304mm x 244mm), 4 Layers



I would not be buying new motherboard so tell other products to boost gaming region. Since mine is 1.6Ghz :cry:
 
swatkat

swatkat

Technomancer
that report saya it all....
u can put upto 3GB of RAM (SDRAM of 133MHz speed) , and yes u can put an AGP 8X card in an AGP 4X slot, no problems.....

go for Radeon 9600 pro or 9800 AGP Card.....

u have 3 RAM slots, and now u have 128MB RAM, upgrade to atleast 512MB Total RAM.....
 
OP
pirates1323

pirates1323

In the zone
swatkat said:
that report saya it all....
u can put upto 3GB of RAM (SDRAM of 133MHz speed) , and yes u can put an AGP 8X card in an AGP 4X slot, no problems.....

go for Radeon 9600 pro or 9800 AGP Card.....

u have 3 RAM slots, and now u have 128MB RAM, upgrade to atleast 512MB Total RAM.....
Click to expand...

Great thankz
 
OP
pirates1323

pirates1323

In the zone
swatkat said:
that report saya it all....
u can put upto 3GB of RAM (SDRAM of 133MHz speed) , and yes u can put an AGP 8X card in an AGP 4X slot, no problems.....

go for Radeon 9600 pro or 9800 AGP Card.....

u have 3 RAM slots, and now u have 128MB RAM, upgrade to atleast 512MB Total RAM.....
Click to expand...

hey how much 8x card will cost and radeon, 9800 AGP card.

Which is better for gaming
 
B

babumuchhala

In the zone
Hey remeber SD RAMs today cost a bomb and prices going up every day. A few weeks back i enquired the rates were 2000 for 128 MB SD RAM and 4K for 256.
Pls dont delay ur ram upgrade. Do it as soon as possible
 
OP
pirates1323

pirates1323

In the zone
babumuchhala said:
Hey remeber SD RAMs today cost a bomb and prices going up every day. A few weeks back i enquired the rates were 2000 for 128 MB SD RAM and 4K for 256.
Pls dont delay ur ram upgrade. Do it as soon as possible
Click to expand...

I am asking for graphics crad prices !!! In todays days........
 
Status
Not open for further replies.
Top Bottom