How 2 connect 2 lappy with one dataone connection(H500)..

Status
Not open for further replies.

medigit

In the zone
plz help/ /i am in 1st floor// my frnd in 3rd floor.. i am taking Dataone BB.. and my frnd want 2 share.. .how 2 do it.. and what will be d cost..???

nd we both want 2 access net at d same time...
 

RCuber

The Mighty Unkel!!!
Staff member
get a wifi router, and two wifi usb or pci cards. and follow the guide here

Cost will be approx 4.5K (wifi router + 2 PCI/USB wifi cards)

Cheap solution.. Get a normal 4 port switch, connect modem to router , one connection from router goes your PC other to your friends PC..

1000-1500 depending on the switch cost.

in both cases you need to configure the network properties..
 
OP
M

medigit

In the zone
what is d cost of router???

so basically i hav 2 buy a port switch.. nd router.. .. is there any other cheap solution/// i dont want 2 spend more on this setup...
 
Last edited:
OP
M

medigit

In the zone
that price is way 2 much.. suppose if i buy Type III modem with 4 ethernet ports them cant i take 2 connection from those ports nd connect it 2 2 laptops??
plz provide very cheap soln..
 
OP
M

medigit

In the zone
wireless is not required.. so.. jst the modem and 2 wires 2 2 laptop.. this will do.. right?? nd one more thng. suppose we both connct at same time.. spedd will be shared or same 2mps for both .??
 

praka123

left this forum longback
taking two dataone H250 connxns seems more viable for you both.unless you need NU which H500 provides.
 

din

Tribal Boy
Hijacking the thread lil bit (as usual ;) )

The Connection is SU (Single User) type isn't it ? Still we ca share it using router ? I know using a proxy it is ok, but possible using a router ?

Sorry, I am totally ignorant in this, thats why the question.
 

RCuber

The Mighty Unkel!!!
Staff member
he he din .. ofcourse we can share :)

check this thread by choto *www.thinkdigit.com/forum/showthread.php?t=54225
 
Last edited:

din

Tribal Boy
Charan said:
he he din .. ofcourse we can share :)

check this thread by choto :) *www.intel.com/products/motherboard/DP35DP/index.htm

I think you are very sleepy ;) Or weekend hangover ? LOL, just kidding, don't get mad !! :D

But what you posted is - Intel® Desktop Board DP35DP - That is not by Choto too ;)

I know its a mistake .. j/k .. anyway what is the correct link ?
 

RCuber

The Mighty Unkel!!!
Staff member
lol .. one should not post replies while watching TV :D

here is the correct link
*www.thinkdigit.com/forum/showthread.php?t=54225
 

din

Tribal Boy
LOL, np

Thank you very much for the link

Offtopic:

Other link you sent, USB ports - 12 numbers !! WOW
 

s151157

Right off the assembly line
do one thing type 192.168.1.1 in your IE this will open the modem conifg page.
Now in WAN Setting make it ppp0e type and type your user name and password.

now connect that modem directly to the switch you will purchase.

and connect your two laptops directly to the switches. Wallah your connection is ready and running.

do not forget to type the ip address as follows in your laptops both of them

First laptop

ip 192.168.1.100
subnet 255.255.255.0
gateway 192.168.1.1

DNS 192.168.1.1

Second Laptop

ip 192.168.1.101
subnet 255.255.255.0
gateway 192.168.1.1

DNS 192.168.1.1
 
OP
M

medigit

In the zone
the above procedure seems 2 be the easiest one..(price of switch??) now .. plz tell how 2 conncetc lappy nd laptop...??
 

Gigacore

Dreamweaver
Price of 8 Port TechCom Switch is about 500 Rs...

What u need:

Few Meters of LAN Cable.

4 RJ-45 Pins (5 Rs Each)

If u purchase 4 meters of LAN cable, then cut the cable to 2 meters. And Get the cables crimpped with "Cross-Over" Type (20 Rs For Crimpping)

Plug the RJ-45 cable that comes from router to Port 1

Then Plug the Cable 1 to one end of the Laptop and the other end to Port 2 of the Switch.
Then Plug the Cable 2 to one end of the laptop and the other end to port 3 of the switch.

Now All the physical setup is complete.

Turn On the Switch, Router and both the Laptops.

No you should see a ballon that says "Network Connected"

In both laptops, follow these steps:

Start>All Programs>Communications>New Connection Wizard>

Click Next, Then Select "Small Office or Home Network".. Then press finish.

Now the "Network Setup Wizard" will start, click next and again next... select the LAN adapter.. and click next..

Give The same workspace name for both..

Here you will get so many options..

Select "This Computer connects to Hub which is connected to Internet" or something like that.. (i forgot)

Perform this in both the Laptops..

It will assign a automatic IPs..

You can change it if u wish.. in the Network Connection Properties..

Like 192.168.10.1 for laptop 1 and 192.168.10.2 to laptop 2

Give the subnet mask to both the laptops as 255.255.255.0

follow the instructions given by s151157, to share the internet settings..
 
Status
Not open for further replies.
Top Bottom