Help me out wid my AGP Card & Mobo

Discussion in 'Hardware Q&A' started by rabbuluvsu, Nov 12, 2006.

Thread Status:
Not open for further replies.
  1. rabbuluvsu

    rabbuluvsu New Member

    Joined:
    Nov 5, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Hyderabad
    I own a Mercury 845GLM-P Mobo, Cel 2.00Ghz Proc and a 64MB GeForce MX440 AGP Card.
    I've plugged the card onto the board but when I try to connect the Monitor cable to the card, there is no display. Neither there are any error beep sounds.
    The card is working fine on my other system- Intel 815(FIC) & Pentium III-733 Mhz Mobo & Proc.
    Plz. suggest the cause and cure of the problem. Is there a need to change the jumper settings on the board which disables the onboard video agp.
    If yes kindly suggest how to do that.
     
  2. assasin

    assasin Banned

    Joined:
    Oct 31, 2006
    Messages:
    1,781
    Likes Received:
    3
    Trophy Points:
    0
    Location:
    Durgapur
    Dere aint no jumper setting on the mobo which disables the onboard gfx.Connect ur monitor to the mobo gfx port after installing the gfx card and see if u get display.If yes den deres a prob with the AGP port.U cud also try using a diff gfx card.
     
Thread Status:
Not open for further replies.

Share This Page