about pentium d 805 *

Status
Not open for further replies.

ashfame

Padawan
FSB of pentium d 805 is 533mhz so ddr2 ram of >533mhz will work as only 533mhz:confused:
and ddr2 533mhz ram r slower than ddr 400mhz?:confused:

so for d 805, should i opt for a board with ddr 400mhz support?
help...
 

\/endett/\

Broken In
ashfame said:
FSB of pentium d 805 is 533mhz so ddr2 ram of >533mhz will work as only 533mhz:confused:
and ddr2 533mhz ram r slower than ddr 400mhz?:confused:

so for d 805, should i opt for a board with ddr 400mhz support?
help...
i never knew that FSB and RAM clocks were related :p
DDr2 533 Mhz is much faster than than DDR 400, but the previous has much higher latencies as well. If u afford a low latency mem., its gr8
 

deathvirus_me

Wise Old Owl
i never knew that FSB and RAM clocks were related

Then u better do some study .. them damm sure are. ..

and ddr2 533mhz ram r slower than ddr 400mhz?

Well .. the cheap one's are . coz they have uber high timings ... at stock with a similar processor , the ddr400 should do better ... but hey ... 100 MBps matter much ???
 
OP
ashfame

ashfame

Padawan
how much more do lower latencies ram cost?
i can get 512mb ddr2 533mhz @ rs.1750!
how to recognize lower latencies ram ?
 

samrulez

Cyborg Agent
ashfame said:
how to recognize lower latencies ram ?

Usually there is a sticker on the module.But alternatively u can use s\w like CPU-z etc.
DDR1 modules usually have a rating of 2.5.....
 
Last edited:
OP
ashfame

ashfame

Padawan
samrulez said:
Usually there is a sticker on the module.But alternatively u can use s\w like CPU-z etc.
DDR1 modules usually have a rating of 2.....
how can i use s/w when i am buying it?
and wht is on the sticker?
 

samrulez

Cyborg Agent
ashfame said:
how can i use s/w when i am buying it?
and wht is on the sticker?

I mean that there is a lable on the module that has the info.i.e speed,size,latency etc.
 

\/endett/\

Broken In
RAM LATENCY
DDR2(low latency) vs DDR (includes names of mems)
Mostly, Corsair and Kingston manufacter these low latency mem modules.

This should help
 

deathvirus_me

Wise Old Owl
how much more do lower latencies ram cost?

Well consider this .. normal ddr400 from zion with latencies 3,3,3,6 costs in at about 4600 bucks for 1 GB ... now consider ddr400 OCZ gold edition modules with latencies at 2,3,2,5 which costs in at 10500 for 1 GB .... not much diff. eeh ??
 
ashfame said:
FSB of pentium d 805 is 533mhz so ddr2 ram of >533mhz will work as only 533mhz:confused:
and ddr2 533mhz ram r slower than ddr 400mhz?:confused:

so for d 805, should i opt for a board with ddr 400mhz support?
help...

Consider overclocking by increasing the FSB.
PD805 overclocks easy.
 

yogi7272

Cyborg Agent
PD805 is the current oc king .. upto 3.8 -3.9 on air .. and 4.2 -4.4 on water ..

also intel 945 chipset does support ddr2 667 ...
 
Status
Not open for further replies.
Top Bottom