yeah that was kinda freeky .. palit doesnt have this gfx card on its own site.. lol
well i m really waiting impatiently for the benchies..!!
i need to get me a new card.. and like really really soon ... and this card is most likely it.. but i still need to get the benchies to get it compared...
well it seems its available on www.theitwares.com for around 11.5k
meaning 11k is the mark for this bad boy.. which is feel is still quite good..
unfortunately there are no benchies or comparisons available on the net as of yet :(
oh yeah..!! i forgot about this thread..
mayank i found out what the deal is
see the temp shown in the msi utility are based on a analogue temp sensor placed somewhere near the cpu hence not so reliable..
how ever other cpu temp reading softwares like core temp etc they read the temp based...
well i was thinking.. should i go with 9800gt or get a GTX+
cause i read somewhere on this forum, that it was doing better that a palit 4850 sonic..which would have been my initial choice when upgrading
well i would suggest you go and buy all the parts yourself.. that way you know what you are getting is the real deal..
then you can either assemble it yourself, or you can have some1 assemble it for you..
and 80-85k is a very good budget.. you should easily get a good config..
the thing...
well i had to rma my xfx 8800 gt
now rashi telling me that seeing as how its out of stock one of 3 things can happen
1. they can give a credit slip for 7k
2. i can get an xfx 9800 gt in lieu of the 8800gt
3. i can get an xfx 9800 gtx + for an additional 4.5k
now i have a Msi p45 platinum...
congrats rajkumar.. i know how it feels when u get your first ever stable overclock :)
now try what desi suggested.. some arctic silver.. an after market cooler.. and some tweaking.. and u should get be able to get some more juice out of it ;)
okies i have been searching all over the net related to ram ..
and seems that D9 chips in ram as considered to be the best.
i very much doubt that any of the hardware vendors will even know that.. unfortunately the only way to know is to remove the heat spreader and if i were to do that the...
ionic. from the looks of the article, those modules seem rather expensive. close to 9k for 2 gb :|
could you perhaps suggest something a tad bit cheaper? lol
also those particular modules are not available here..
well its because of the components used inside the smps.
you may or may not know this.. our pcs use dc supply and not ac. so the smps has to rectify the ac to dc.. make it smooth and then also handle the load. the cheap smps that you get with the case have a max output of about 250-300W if that...
it doesnt matter which ddr memory your graphics card uses.
wether its ddr2/ddr3 or ddr5 (it only effects the performance of your card)
it will work on any motherboard, so long as you have enough power and a pciex slot ;)
yep..
the Vx450 comes for about 3.7-3.9k
the cooler master though comes for about 3k ish..
as to why such a diff?
its with regards to the internal components.. as well as the amperage available in both the smps
well if your budget is only around 6-8k for gfx card then no problems at all ...
hmm with a budget of 10k .. check out antec 900 ..
it is 1 smecksy looking case... should come for around 7k ish..if u get lower even better..
as for ur psu requirments.. the Vx450 should be able to handle a single gfx no probs.
i am using the coolermaster 600W extreme edition and have no...
umm your budget is a total of 5k for both smps and case ?
i thought it was 5k just for the case.
well the 450W SMPS from crosair is very very good from what i have heard. and it should do just fine so long as you are not planning to go sli/Xfire
well i dont know abt the cases you have...
id suggest you go for a cooler master CM690 . its a good cabinet with loads of fans and also has proper cable management. it comes for about 4k but no smps.
for smps you can try coolermaster 600W extreme or Crosair 450W
as for purchasing it. if you live in the suburbs you can try...
here is what you do .. when you next start your computer just after post ad before you see the windows logo keep tapping f8 key .. you will then see a list select disable restart on hardware failure.. and then load windows normally.
next thing you should do is try to get the BSOD. meaning do...
even if there isnt any particualr file listed in the bsod here is what u can do\
note down the error codes.
it should be something like 0x000***** something like that. if you have that u can always search the microsoft kb articles or u can always google that string. it will lead you to what is...
Hi Guest we just wanted to alert you to a major change in the forum. We will no longer be allowing the posting of outgoing links. Please use the attachment feature to attach media to your posts.